Difference between revisions of "Noise Gate"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m
m
Line 10: Line 10:
 
#    Select '''Noise Gate'''
 
#    Select '''Noise Gate'''
 
#    Set the Thresh to '''-40.0dB'''
 
#    Set the Thresh to '''-40.0dB'''
#    Leave Ramp/Speed at '''50%'''<br>The Ramp/Speed describes a ratio of how the filter attenuates frequencies past the cut-off point (how quickly the reduction is applied).
+
#    Leave Ramp/Speed at '''50%'''<br>The Ramp/Speed describes a ratio of how the noise gate attenuates the sound once the threshold has been reached (how quickly the reduction is applied).
  
 
If you find this cuts off the microphone even while you are speaking directly into the microphone try setting the Thresh to -50.0dB. You may have to experiment with the Thresh to get the Noise Gate to work with different vocalists.
 
If you find this cuts off the microphone even while you are speaking directly into the microphone try setting the Thresh to -50.0dB. You may have to experiment with the Thresh to get the Noise Gate to work with different vocalists.

Revision as of 18:08, 6 January 2020

One cause of feedback is open microphones on the stage. You can use the Noise Gate in ToneMatch mixer to shut down microphones that are not actively being used.

You can use the Comp/Gate Noise Gate to automatically turn off a microphone when it is not being used. This can reduce unwanted background noise and increase the gain-before-feedback of your system. The Noise Gate prevents signals below a certain volume level from reaching the outputs of the mixer. You set that certain volume level by setting the Threshold.


  1. Press the CHEDIT button on the channel you want to control
  2. Turn the Rotary Selector to COMP/GATE
  3. Under the display, turn the Type button so you can see the menu
  4. Select Noise Gate
  5. Set the Thresh to -40.0dB
  6. Leave Ramp/Speed at 50%
    The Ramp/Speed describes a ratio of how the noise gate attenuates the sound once the threshold has been reached (how quickly the reduction is applied).

If you find this cuts off the microphone even while you are speaking directly into the microphone try setting the Thresh to -50.0dB. You may have to experiment with the Thresh to get the Noise Gate to work with different vocalists.

Here's a quick video to show you how to do it.