PS1 Power Stand / Bass Line Out

From Bose Portable PA Encyclopedia
Revision as of 22:43, 23 December 2006 by ST (talk | contribs) (formatting reference)
Jump to: navigation, search

Bass Line Out and B1 behavior

Hilmar-at-Bose[1]. This is based on the design goal that “You should always sound the same; no matter how much Bass stuff is attached” I can try to explain my view of why this is a good design goal (of which you may disagree) but let’s look at the actual behavior first.

Without Bass Line out

  • 1xB1: 40Hz-180Hz, B1 specific EQ, some nominal gain that we call 0dB
  • 2xB1: 40Hz-180Hz, B1 specific EQ, -6dB as compared to nominal

With Bass Line Out

  • 0xB1: 40-180 Hz, flat, roughly the same gain as 2 B1
  • 1xB1: 40Hz-180Hz, B1 specific EQ, -6dB as compared to nominal
  • 2xB1: 40Hz-180Hz, B1 specific EQ, -12dB as compared to nominal

What this complex behavior does is the following. No matter if you attach 1, 2, or 4 B1s, you will get pretty much the same balance between all combined B1s and the L1s. It’s a little off for 3, 5, 6, 7 & 8 B1s, but still reasonably close.

With More Than 4 B1s

A little more insight. [2] We actually can't measure the exact number of Packlites, so there is a slight error if you use anything but 1,2, or 4 B1s. For 6 B1s you will be 3.5 dB bass heavy, for 8 B1s it'll be 6 dB. However, these are rare cases, and if you go through the trouble to hook up 8 B1s, I guess you are actually looking for something more bass heavy.

Don't ask how I know.