Difference between revisions of "PS1 Powerstand Connections/Line Out/Insert"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
(first ed)
 
m (Line Out from Insert Point)
Line 4: Line 4:
 
* post {{R1}} Channel Level
 
* post {{R1}} Channel Level
  
For Channels One or Two insert a 1/4 inch cable halfway into the Insert jack to get a signal that is controlled by the volume control on the Remote. This is also known as the [[Half Insert]] method. For more information about 1/4 cables see [[TRS|Tip Ring Sleeve connections]].
+
For Channels One or Two insert a 1/4 inch cable halfway into the Insert jack to get a signal that is controlled by the volume control on the Remote. This is also known as the [[Half Insert]] method. For more information about 1/4 cables see [[TRS|Tip Ring Sleeve connections]]. The rectangular box shown below the input panel is a [[DI]], used to output the signal to a console or house system.
  
 
[[Image:PS1LineOutInsert.jpg]]
 
[[Image:PS1LineOutInsert.jpg]]

Revision as of 15:15, 14 November 2006

Line Out from Insert Point

  • access from the "ring" connection at the Insert Point
  • post trim
  • post R1 Remote Channel Level

For Channels One or Two insert a 1/4 inch cable halfway into the Insert jack to get a signal that is controlled by the volume control on the Remote. This is also known as the Half Insert method. For more information about 1/4 cables see Tip Ring Sleeve connections. The rectangular box shown below the input panel is a DI, used to output the signal to a console or house system.

PS1LineOutInsert.jpg