Difference between revisions of "PS1 Powerstand Connections/Line Out/Insert"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
(first ed)
 
(Model I and Classic icons, category updates)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 +
{{Model I icon}}{{Classic icon}}
 
== Line Out from Insert Point ==
 
== Line Out from Insert Point ==
 
* access from the "ring" connection at the Insert Point
 
* access from the "ring" connection at the Insert Point
Line 4: Line 5:
 
* post {{R1}} Channel Level
 
* post {{R1}} Channel Level
  
For Channels One or Two insert a 1/4 inch cable halfway into the Insert jack to get a signal that is controlled by the volume control on the Remote. This is also known as the [[Half Insert]] method. For more information about 1/4 cables see [[TRS|Tip Ring Sleeve connections]].
+
For Channels One or Two insert a 1/4 inch cable halfway into the Insert jack to get a signal that is controlled by the volume control on the Remote. This is also known as the [[Half Insert]] method. For more information about 1/4 cables see [[TRS|Tip Ring Sleeve connections]]. The rectangular box shown below the input panel is a [[DI]], used to output the signal to a console or house system.
  
 
[[Image:PS1LineOutInsert.jpg]]
 
[[Image:PS1LineOutInsert.jpg]]
Line 13: Line 14:
 
   
 
   
  
[[category:L1™ System]]
+
[[Category:L1™ System]]
[[category:PS1 Powerstand]]
+
[[Category:PS1 Powerstand]]
[[category:PS1 Powerstand Connections]]
+
[[Category:PS1 Powerstand Connections]]
 +
[[Category:Model I]]
 +
[[Category:Classic]]

Latest revision as of 03:07, 29 April 2007

L1 Model I This information is applicable to the L1 Model I
Classic This information is applicable to the L1® Classic

Line Out from Insert Point

  • access from the "ring" connection at the Insert Point
  • post trim
  • post R1 Remote Channel Level

For Channels One or Two insert a 1/4 inch cable halfway into the Insert jack to get a signal that is controlled by the volume control on the Remote. This is also known as the Half Insert method. For more information about 1/4 cables see Tip Ring Sleeve connections. The rectangular box shown below the input panel is a DI, used to output the signal to a console or house system.

PS1LineOutInsert.jpg