Difference between revisions of "Phase Cancellation"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
(moved link to Phase to the bottom)
(credit to sfu)
Line 8: Line 8:
 
</html>
 
</html>
  
[http://www.sfu.ca/sca/Manuals/ZAAPf/p/phase.html Phase at SFU]]
+
The illustration above  is from [http://www.sfu.ca/sca/Manuals/ZAAPf/p/phase.html Phase at SFU]]. Follow the link for a very interesting discussion about Phase.
 +
 
  
 
Phase cancellation occurs when two signals of the same frequency are out of phase with each other resulting in either a boost or cut in the overall level of the combined signal.
 
Phase cancellation occurs when two signals of the same frequency are out of phase with each other resulting in either a boost or cut in the overall level of the combined signal.

Revision as of 02:06, 23 August 2006

Phase (cancellation, interference)

Running two inputs 180° out-of-phase puts the peaks and valleys of the sine wave so that they null each other out when summed (see the middle picture below). This has a tendency to cancel out both inputs, and is quite pronounced in the "far" field, but negligible in the "near" field. Normally phase cancellation is undesirable, but when you know what you want (and in this case, what you don't want) then you do it deliberately.

The illustration above is from Phase at SFU]. Follow the link for a very interesting discussion about Phase.


Phase cancellation occurs when two signals of the same frequency are out of phase with each other resulting in either a boost or cut in the overall level of the combined signal. -- Phase at the Zen Audio Project

If you are suffering from some or all of these, you could be experiencing Phase Interference

  1. "Hot" and "cold" spots in the audience area
  2. Tonal coloration
  3. Poor speech intelligibility
  4. Lack of music clarity
  5. Poor gain-before-feedback
  6. Poor imaging

See: Practical Realities of Phase Interference

See: Phase