Difference between revisions of "Phase Cancellation"
(credit to sfu) |
(should not occur with units space more than about four feet apart) |
||
| Line 2: | Line 2: | ||
<!-- TODO resolve circular reference to category and this page --> | <!-- TODO resolve circular reference to category and this page --> | ||
| + | == Practical Note == | ||
| + | "Finally, we have convinced ourselves that audible phase cancellation should not occur from two systems spaced more than about four feet apart. The combing is just too dense. So all of that makes sense." - Ken-at-Bose <ref>See: http://bose.infopop.cc/eve/forums/a/tpc/f/6806048934/m/7831003593?r=3291045593#3291045593 in | ||
| + | {{Forum}}</ref> | ||
| + | |||
| + | |||
| + | === Theoretical Discussion === | ||
Running two inputs 180° out-of-phase puts the peaks and valleys of the sine wave so that they null each other out when summed (see the middle picture below). This has a tendency to cancel out both inputs, and is quite pronounced in the "far" field, but negligible in the "near" field. Normally phase cancellation is undesirable, but when you know what you want (and in this case, what you don't want) then you do it deliberately. | Running two inputs 180° out-of-phase puts the peaks and valleys of the sine wave so that they null each other out when summed (see the middle picture below). This has a tendency to cancel out both inputs, and is quite pronounced in the "far" field, but negligible in the "near" field. Normally phase cancellation is undesirable, but when you know what you want (and in this case, what you don't want) then you do it deliberately. | ||
<html> | <html> | ||
Revision as of 11:06, 26 October 2006
Phase (cancellation, interference)
Practical Note
"Finally, we have convinced ourselves that audible phase cancellation should not occur from two systems spaced more than about four feet apart. The combing is just too dense. So all of that makes sense." - Ken-at-Bose [1]
Theoretical Discussion
Running two inputs 180° out-of-phase puts the peaks and valleys of the sine wave so that they null each other out when summed (see the middle picture below). This has a tendency to cancel out both inputs, and is quite pronounced in the "far" field, but negligible in the "near" field. Normally phase cancellation is undesirable, but when you know what you want (and in this case, what you don't want) then you do it deliberately.
The illustration above is from Phase at SFU]. Follow the link for a very interesting discussion about Phase.
Phase cancellation occurs when two signals of the same frequency are out of phase with each other resulting in either a boost or cut in the overall level of the combined signal.
-- Phase at the Zen Audio Project
If you are suffering from some or all of these, you could be experiencing Phase Interference
- "Hot" and "cold" spots in the audience area
- Tonal coloration
- Poor speech intelligibility
- Lack of music clarity
- Poor gain-before-feedback
- Poor imaging
See: Practical Realities of Phase Interference
See: Phase