Portable Power Stations for L1 Systems

From Bose Portable PA Encyclopedia
Revision as of 22:31, 1 May 2021 by ST (talk | contribs) (Results)
Jump to: navigation, search

L1 Model II This information is applicable to the L1®  Model II
T8S This information is applicable to the T8S ToneMatch® mixer
T4S This information is applicable to the T4S ToneMatch® mixer
T1 This information is applicable to the T1 ToneMatch® audio engine

Jackery Explorer Power Station 500

Overview

These are the results of using a Jackery Explorer Power Station 500 to run L1 Pro (various) and L1 Model II with ToneMatch Mixer[1], two B1 bass modules, and Kemper Stage electric guitar processor.

Conclusion - Jackery Explorer Power Station 500 should provide power for moderate-to-high volume for at least five hours for an L1 Pro or L1 Legacy system with a ToneMatch Mixer[1].

  • You should get comparable results with an L1 Compact.
  • The power consumption is similar for all models. The volume (Sound Pressure Level SPL) determines how much power you consume. The louder you run the system, the faster you deplete the power. For example, you might get 7 hours of music at 80 dBC SPL and only 2 hours at 110 dBC SPL.
Update - L1 Pro Systems (Pro8, Pro16, Pro32 with Sub 1)
I have repeated the same tests using the L1 Pro systems. The power consumption is comparable to that shown for the L1 Model II with two B1s shown in the tables below.
The power consumption is similar for all models. The volume determines how much power you consume. The louder you run the system, the faster you deplete the power. For example, you might get 7 hours of music at 80 dBC SPL and only 2 hours at 110 dBC SPL.
28 February 2021

Jackery Explorer Power Station 500 Specifications

  • Lithium battery power: 518Wh/144,400mAh battery capacity,
  • 500W Rated Power and 1000W Surge Power
  • Pure Sine Wave AC
  • 13 pounds
  • Time to recharge using AC adapter - 8 hours
  • Warning - the smaller Jackery Explorer Power Stations do not provide Pure Sine Wave AC power and are not recommended.

System as Tested

L1 Model II with two B1
Kemper Profiler Stage
  • SPL measured at one meter, C-weighted
  • I have repeated the same tests using the L1 Pro systems. The power consumption is comparable to that shown for the L1 Model II with two B1s shown in the tables below.

Results

Equipment SPL
 dBC
Draw
 on display
Net
 Watts
 Estimated
 Run Time
 Hours 
Calculation  518 Watt-Hours x 85% / Draw in Watts = Run Time Hours
Jackery 500 0 0
AC Inverter engaged 5          88.1
Power Bar with Surge Arrest 7 2          62.9
T1 with ToneMatch Power Supply 17 10          25.9
T4S with ToneMatch Power Supply 20 13          22.0
T8S with ToneMatch Power Supply 25 18          17.6
L1 Model II with 2 x B1 idle 40 33          11.0
L1 Model II with 2 x B1 + T1 idle 49 42            9.0
L1 Model II with 2 x B1 + T1 80 52 45            8.5
L1 Model II with 2 x B1 + T1 90 57 50            7.7
L1 Model II with 2 x B1 + T1 100 72 65            6.1
L1 Model II with 2 x B1 + T1 110 193 186            2.3
L1 Model II with 2 x B1 + T4S idle 51 44            8.6
L1 Model II with 2 x B1 + T4S 80 54 47            8.2
L1 Model II with 2 x B1 + T4S 90 61 54            7.2
L1 Model II with 2 x B1 + T4S 100 75 68            5.9
L1 Model II with 2 x B1 + T4S 110 200 193            2.2
L1 Model II with 2 x B1 + T8S idle 56 49            7.9
L1 Model II with 2 x B1 + T8S 80 59 52            7.5
L1 Model II with 2 x B1 + T8S 90 66 59            6.7
L1 Model II with 2 x B1 + T8S 100 80 73            5.5
L1 Model II with 2 x B1 + T8S 110 205 198            2.1
Sub1 Subwoofer Startup Idle/Startup 24 20            5.5
Sub1 Subwoofer 110 205 198            2.1


Run Time Calculation Examples

518 watt hours x 85% (for inverter efficiency) = 440 watt hours.

Example: L1 Model II + 2 B1 + T4S at 100 dB

440 watt hours / 75 watts = 5.9 hours

Add draw from Kemper Profiler Stage at 12 watts

440 watt hours / (75 + 12) watts = 5.0 hours

If using a T8S instead of T4S add 5 watts to draw

440 watt hours / (75 + 12 + 5) watts = 4.8 hours

L1 Compact[2] (60 watts at 100 dB) + T4S

440 watt hours / (60 + 20) watts = 5.5 hours

Remarks

Occasionally I perform outdoors in settings where an S1 Pro system doesn't provide adequate coverage. I wanted a solution to power an L1 Compact and a ToneMatch Mixer[1].

Minimum Requirements
  • Pure Sine Wave[3] inverter
  • Minimum run time at moderate volume (85 dBC SPL) 5 hours

The smallest capacity unit I could find was the Jackery Explorer Power Station 500.

Here's my rationale that led me to test using the L1 Model II.

For most outdoor gigs: