Recording USB Dry

You can use your T1 ToneMatch Audio Engine as a the USB soundcard with your computer and record. Here is a quick look at how to send a DRY (without any effects) signal to the computer while retaining any settings you prefer to hear for monitoring or performance.

To record direct from the T1 ToneMatch Audio Engine to a computer through the USB port without any effects you can use the T1 ToneMatch^® Audio Engine Aux.

Here is an example.

If your source (microphone or instrument) is connected to T1 Channel 1

• Channel 1 - Press CHEdit
• Turn the Rotary Selector to Aux
• Set Aux settings as shown here.

Set the USB to PC settings to send Aux

• Turn the Rotary Selector to Prefs
• Set the USB to PC settings as shown below

For more details on these settings see: USB

---