Difference between revisions of "S1 Pro System LEDs"
m |
m |
||
| Line 7: | Line 7: | ||
<tbody> | <tbody> | ||
<tr> | <tr> | ||
| − | <td><strong>Off</strong></td> | + | <td width=35%><strong>Off</strong></td> |
<td>System is off</td> | <td>System is off</td> | ||
</tr> | </tr> | ||
| Line 24: | Line 24: | ||
</tbody> | </tbody> | ||
</table> | </table> | ||
| − | <h3> | + | <h3><br /> Battery LED indicator</h3> If using the optional battery accessory, the LED next to the system power switch shows the battery's charge state by flashing when powered on. To check the charge at any time, double-press the |
| + | <em>Bluetooth</em> button in the Input 3 section. | ||
<br /> | <br /> | ||
<table border="0" cellpadding="1" cellspacing="1" style="width: 40%;"> | <table border="0" cellpadding="1" cellspacing="1" style="width: 40%;"> | ||
<tbody> | <tbody> | ||
<tr> | <tr> | ||
| − | <td>< | + | <td width=35%>Blue - 4 flashes</td> |
| − | <td> | + | <td>75 - 100% charge</td> |
| + | </tr> | ||
| + | <tr> | ||
| + | <td>Blue - 3 flashes</td> | ||
| + | <td>50 - 74% charge</td> | ||
| + | </tr> | ||
| + | <tr> | ||
| + | <td>Blue - 2 flashes</td> | ||
| + | <td>25 - 49% charge</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
| − | <td><strong> | + | <td>Blue - 1 flash - may appear to be flashing</td> |
| − | <td> | + | <td>10 - 24% charge</td> |
| + | </tr> | ||
| + | <!-- | ||
| + | <tr> | ||
| + | <td><strong>Blue - Blinking</strong></td> | ||
| + | <td>Early warning about battery depletion</td> | ||
</tr> | </tr> | ||
| + | --> | ||
<tr> | <tr> | ||
| − | <td>< | + | <td>Red - 1 flash</td> |
| − | <td> | + | <td>Less than 10% charge</td> |
| + | </tr> | ||
| + | <!-- | ||
| + | <tr> | ||
| + | <td>Solid Red</td> | ||
| + | <td>Battery depleted </td> | ||
</tr> | </tr> | ||
| + | --> | ||
</tbody> | </tbody> | ||
| − | </table> | + | </table> |
| + | |||
<h3>Signal LED</h3> There are 3 signal LEDs: one above the volume knob for Inputs 1, 2 and 3. | <h3>Signal LED</h3> There are 3 signal LEDs: one above the volume knob for Inputs 1, 2 and 3. | ||
<br /> | <br /> | ||
| Line 47: | Line 69: | ||
<tbody> | <tbody> | ||
<tr> | <tr> | ||
| − | <td><strong>Off</strong></td> | + | <td width=35%><strong>Off</strong></td> |
<td>No or low level signal present</td> | <td>No or low level signal present</td> | ||
</tr> | </tr> | ||
| Line 60: | Line 82: | ||
</tbody> | </tbody> | ||
</table> | </table> | ||
| − | <h3> | + | |
| − | + | ||
| + | <h3>Bluetooth LED</h3> The Bluetooth LED is located on the Bluetooth button under Input 3 on the connection / control panel. | ||
<br /> | <br /> | ||
<table border="0" cellpadding="1" cellspacing="1" style="width: 40%;"> | <table border="0" cellpadding="1" cellspacing="1" style="width: 40%;"> | ||
<tbody> | <tbody> | ||
<tr> | <tr> | ||
| − | <td> | + | <td width=35%><strong>Off</strong></td> |
| − | <td> | + | <td>Bluetooth is off</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
| − | <td> | + | <td><strong>White (flashing)</strong></td> |
| − | <td> | + | <td>Pairing mode / connecting</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
| − | <td> | + | <td><strong>White (solid)</strong></td> |
| − | <td> | + | <td>Connected to Bluetooth device</td> |
</tr> | </tr> | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
</tbody> | </tbody> | ||
| − | </table> | + | </table> |
| + | |||
</html> | </html> | ||
Revision as of 05:28, 18 May 2019
S1 LED status
Power LED
There are two power related LEDs: Power on the front of the system and Battery Status on the back of the system next to the power switch.
| Off | System is off |
| Blue | System is on |
| Blue (flashing) | System is in low power sleep mode Happens after dormant for an hour Resumes automatically when an audio signal is present |
| Red | System fault |
Battery LED indicator
If using the optional battery accessory, the LED next to the system power switch shows the battery's charge state by flashing when powered on. To check the charge at any time, double-press the
Bluetooth button in the Input 3 section.
| Blue - 4 flashes | 75 - 100% charge |
| Blue - 3 flashes | 50 - 74% charge |
| Blue - 2 flashes | 25 - 49% charge |
| Blue - 1 flash - may appear to be flashing | 10 - 24% charge |
| Red - 1 flash | Less than 10% charge |
Signal LED
There are 3 signal LEDs: one above the volume knob for Inputs 1, 2 and 3.
| Off | No or low level signal present |
| Green | Signal present |
| Red | Signal clipping |
Bluetooth LED
The Bluetooth LED is located on the Bluetooth button under Input 3 on the connection / control panel.
| Off | Bluetooth is off |
| White (flashing) | Pairing mode / connecting |
| White (solid) | Connected to Bluetooth device |