S1 Pro System LEDs

From Bose Portable PA Encyclopedia
Revision as of 15:02, 8 October 2018 by ST (talk | contribs) (Created page with "<html> <div class="col-xs-12 no-rpad-r"><div id="rn_CL_ContentDetail_9" class="rn_CL_ContentDetail"><div class="col-xs-12 X_OPTION" docId="HS12185" answerid="1059393" ><div cl...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

HS12185 S1 LED status
HS12185

Power LED

There are two power LEDs: one on the front of the system and one on the back of the system next to the power switch.
 
Off System is off
Blue System is on
Red System fault
 

Bluetooth LED

The Bluetooth LED is located on the Bluetooth button under Input 3 on the connection / control panel.
 
Off Bluetooth is off
White (flashing) Pairing mode / connecting
White (solid) Connected to Bluetooth device
 

Signal LED

There are 3 signal LEDs: one above the volume knob for Inputs 1, 2 and 3.
 
Off No or low level signal present
Green Signal present
Red Signal clipping


Battery LED indicator

If using the optional battery accessory, the LED next to the system power switch shows the battery's charge state by flashing when powered on. To check the charge at any time, double-press the Bluetooth button in the Input 3 section.
 
Blue - 4 flashes 75 - 100% charge
Blue - 3 flashes 50 - 74% charge
Blue - 2 flashes 25 - 49% charge
Blue - 1 flash 10 - 24% charge
Red - 1 flash Less than 10% charge