Difference between revisions of "T1® Audio Engine / Master Output Pre / Post"
m |
m (ST moved page T1® Audio Engine / Master Output Pre / Post to T1® Audio Engine / Master Output Pre / Post) |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | When using the {{T1}} for recording or when sending a signal to an external system, it may be useful to set the Master Output to Pre-Master Volume. This sends the full output of the {{T1 nl}} directly to | + | When using the {{T1}} for recording or when sending a signal to an {{F1}} or other external system, it may be useful to set the Master Output to Pre-Master Volume. This sends the full output of the {{T1 nl}} directly to the Master Analog ¼ inch jack |
| − | + | ||
| − | |||
This puts the control of the signal at the receiving end (external system or computer). | This puts the control of the signal at the receiving end (external system or computer). | ||
| − | + | But be careful if you have an L1® or other device connected to the T1® Master Output. The signal will be Pre-Master Volume. That is '''loud''' and similar to having the Master Output at 12:00 o'clock. | |
Here is how you change the Master Output from Pre-Master Volume (the default) to Post-Master Volume. | Here is how you change the Master Output from Pre-Master Volume (the default) to Post-Master Volume. | ||
| Line 15: | Line 14: | ||
[[Image:T1MasterOutputPrePost03.png]] | [[Image:T1MasterOutputPrePost03.png]] | ||
| + | For information about using a {{T1}} with and {{F1}} see [[T1 ToneMatch® Audio Engine to F1 System]]. | ||
---- | ---- | ||
Latest revision as of 04:22, 26 March 2017
When using the T1 ToneMatch Audio Engine for recording or when sending a signal to an F1 Model 812 Flexible Array Loudspeaker or other external system, it may be useful to set the Master Output to Pre-Master Volume. This sends the full output of the T1 ToneMatch® Audio Engine directly to the Master Analog ¼ inch jack
This puts the control of the signal at the receiving end (external system or computer).
But be careful if you have an L1® or other device connected to the T1® Master Output. The signal will be Pre-Master Volume. That is loud and similar to having the Master Output at 12:00 o'clock.
Here is how you change the Master Output from Pre-Master Volume (the default) to Post-Master Volume.
For information about using a T1 ToneMatch Audio Engine with and F1 Model 812 Flexible Array Loudspeaker see T1 ToneMatch® Audio Engine to F1 System.