T1® Audio Engine / Master Output Pre / Post

From Bose Portable PA Encyclopedia
Revision as of 14:04, 2 November 2009 by ST (talk | contribs) (New page: When using the {{T1}} for recording or when sending a signal to an external system, it may be useful to set the Master Output to Pre-Master Volume. This sends the full output of the {{T1 n...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

When using the T1 ToneMatch Audio Engine for recording or when sending a signal to an external system, it may be useful to set the Master Output to Pre-Master Volume. This sends the full output of the T1 ToneMatch® Audio Engine directly to

  • the Master Analog ¼ inch jack and
  • the USB output

This puts the control of the signal at the receiving end (external system or computer).

This should solve issues with low output when recording by USB.

Here is how you change the Master Output from Pre-Master Volume (the default) to Post-Master Volume.

T1MasterOutputPrePost01.png

T1MasterOutputPrePost02.png

T1MasterOutputPrePost03.png


Retrieved from "https://toonz.ca/bose/wiki/index.php?title=T1®_Audio_Engine_/_Master_Output_Pre_/_Post&oldid=11643"