T1® Stereo Sources

From Bose Portable PA Encyclopedia
Revision as of 17:20, 21 November 2014 by ST (talk | contribs)
Jump to: navigation, search

To connect a stereo source to a T1 ToneMatch Audio Engine see: Backing Tracks

Connect a stereo source to the T1


Warning about Cables

18stereoTo14stereoT1.png

If you use a cable like this to connect a stereo source to the T1 ToneMatch Audio Engine

  • In Channels 1,2,3 you will hear only one side of the stereo source
  • In Channels 4 or 5 the left and right channels from the source will tend to cancel each other out and you will get little or no output.





Corrections to the T1® Owners Guide pages 38 and 40

From the original diagrams it looks like this kind of cable may work.

18stereoTo14stereo.png

Correction - use a cable like this connected to T1 ToneMatch Audio Engine Channels 4/5

18TRSto2x14TS.png

Original page (red x indicates error)

T1SingerSongWriterP38Original.png

Correction - use a cable like this connected to T1 ToneMatch Audio Engine Channels 4/5

18TRSto2x14TS.png

T1SingerSongWriterP38.png

Original page (red x indicates error)

T1DJPlaybackP40Original.png

Correction - use a cable like this connected to T1 ToneMatch Audio Engine Channels 4/5

18TRSto2x14TS.png

T1DJPlaybackP40.png