Difference between revisions of "T1 ToneMatch® Audio Engine / Click Track with In Ear Monitors"

Revision as of 09:35, 3 October 2009

Question: How do I run a Click Track through a T1 ToneMatch Audio Engine?

Answer: You can send the click to any channel on the T1 ToneMatch^® Audio Engine, leaving it's volume fader (to master output) OFF.

Plug the in-ears into the Aux out on the T1 ToneMatch^® Audio Engine.

Select Aux on the T1 ToneMatch^® Audio Engine's rotary dial, press the channel edit button for the Click's channel.

Select Prefader on the Aux output, and adjust the volume until you hear the click.

To monitor the other channels on the T1 ToneMatch^® Audio Engine, follow the same procedure with each channel, sending it's signal to the Aux output.

The nice thing is that the Aux out will send a signal to both ears of your in-ears, if you need to use both.

@@ Line 5: / Line 5: @@
 Plug the in-ears into the Aux out on the {{T1 nl}}.
 Select Aux on the {{T1 nl}}'s rotary dial, press the channel edit button for the Click's channel.
-Select Prefader on the Aux output, and adjust the volume e until you hear the click.
+Select Prefader on the Aux output, and adjust the volume until you hear the click.
 To monitor the other channels on the {{T1 nl}}, follow the same procedure with each channel, sending it's signal to the Aux output.