T1 ToneMatch® Audio Engine / Click Track with In Ear Monitors

From Bose Portable PA Encyclopedia
Revision as of 09:34, 3 October 2009 by ST (talk | contribs) (New page: Question: How do I run a Click Track through a {{T1}}? Answer: You can send the click to any channel on the {{T1 nl}}, leaving it's volume fader (to master output) OFF. Plug the in-ears ...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Question: How do I run a Click Track through a T1 ToneMatch Audio Engine?

Answer: You can send the click to any channel on the T1 ToneMatch® Audio Engine, leaving it's volume fader (to master output) OFF.

Plug the in-ears into the Aux out on the T1 ToneMatch® Audio Engine. Select Aux on the T1 ToneMatch® Audio Engine's rotary dial, press the channel edit button for the Click's channel. Select Prefader on the Aux output, and adjust the volume e until you hear the click.

To monitor the other channels on the T1 ToneMatch® Audio Engine, follow the same procedure with each channel, sending it's signal to the Aux output.

The nice thing is that the Aux out will send a signal to both ears of your in-ears, if you need to use both.

Source: Drumr Pete - How do I use a Click Track with In Ear Monitors