Difference between revisions of "T1 ToneMatch® Audio Engine / Connections to Model II"
(First Ed) |
m |
||
| Line 9: | Line 9: | ||
This connection is made with a standard ¼ inch jack instrument cable. This can be Tip-Sleeve or Tip-Ring-Sleeve connectors. | This connection is made with a standard ¼ inch jack instrument cable. This can be Tip-Sleeve or Tip-Ring-Sleeve connectors. | ||
| + | |||
| + | Note: A T1™ connected to the the Analog input will require the optional T1™ AC Adapter for power. | ||
| + | |||
Revision as of 13:19, 2 January 2008
The L1 Model II can accept two inputs.
ToneMatch™ Connection
The ToneMatch™ connection is specifically designed for a T1™. The ToneMatch™ cable is supplied with the T1 ToneMatch Audio Engine and uses a male Ethercon connector at both ends.
Analog Connection
The Analog connection is a ¼ inch phone jack. You can use this for a the second T1™ using the T1™ Analog Master output (¼ inch phone jack).
This connection is made with a standard ¼ inch jack instrument cable. This can be Tip-Sleeve or Tip-Ring-Sleeve connectors.
Note: A T1™ connected to the the Analog input will require the optional T1™ AC Adapter for power.
