Difference between revisions of "T1 ToneMatch® Audio Engine / Connections to Model II"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m
(A T1™ connected to the the Analog input will require the optional {{T1}} power supply. See the {{Bose Accessories Page}} for details.)
Line 10: Line 10:
 
This connection is made with a standard ¼ inch jack instrument cable. This can be Tip-Sleeve or Tip-Ring-Sleeve connectors.  
 
This connection is made with a standard ¼ inch jack instrument cable. This can be Tip-Sleeve or Tip-Ring-Sleeve connectors.  
  
Note: A T1™ connected to the the Analog input will require the optional T1™ AC Adapter for power.
+
Note: A T1™ connected to the the Analog input will require the optional {{T1}} power supply. See the {{Bose Accessories Page}} for details.
  
  

Revision as of 13:23, 2 January 2008

The L1 Model II can accept two inputs.

ToneMatch™ Connection

The ToneMatch™ connection is specifically designed for a T1™. The ToneMatch™ cable is supplied with the T1 ToneMatch Audio Engine and uses a male Ethercon connector at both ends.

Analog Connection

The Analog connection is a ¼ inch phone jack. You can use this for a the second T1™ using the T1™ Analog Master output (¼ inch phone jack).

This connection is made with a standard ¼ inch jack instrument cable. This can be Tip-Sleeve or Tip-Ring-Sleeve connectors.

Note: A T1™ connected to the the Analog input will require the optional T1 ToneMatch Audio Engine power supply. See the Bose® Accessories Page for details.


T1x2IntoModelII.gif