Difference between revisions of "T1 ToneMatch® Audio Engine / Connections to Model II"
m |
|
(No difference)
| |
Revision as of 12:46, 27 February 2008
The L1 Model II can accept two inputs.
ToneMatch™ Connection
The ToneMatch™ connection is specifically designed for a T1™. The ToneMatch™ cable is supplied with the T1 ToneMatch Audio Engine and uses a male Ethercon connector at both ends.
Analog Connection
The Analog connection is a ¼ inch phone jack. You can use this for a the second T1™ using the T1™ Analog Master output (¼ inch phone jack).
This connection is made with a standard ¼ inch jack instrument cable. This can be Tip-Sleeve or Tip-Ring-Sleeve connectors.
Note: A T1™ connected to the the Analog input will require the optional T1 ToneMatch Audio Engine power supply. See the Bose® Accessories Page for details.
