Difference between revisions of "T1 ToneMatch® Audio Engine / Connections to Model II"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
(® replaces ™ and image or Model II inputs)
m (link to standard T1 ToneMatch® Audio Engine Power Supply page)
Line 1: Line 1:
The {{Model II}} can accept two inputs.  
+
The {{Model II}} can accept two inputs. [[Image:ModelIIInputs.gif|right|Model II inputs]]  
[[Image:ModelIIInputs.gif|right|Model II inputs]]
 
=== ToneMatch™ Connection ===
 
The ToneMatch® connection is specifically designed for a {{T1}}.
 
The ToneMatch® cable is supplied with the {{T1}} and uses a male Ethercon connector at both ends.
 
  
=== Analog Connection ===
+
=== ToneMatch™ Connection ===
The Analog connection is a ¼ inch phone jack. You can use this for a the second T1® using the T1® Analog Master output (¼ inch phone jack).
 
  
This connection is made with a standard ¼ inch jack instrument cable. This can be Tip-Sleeve or Tip-Ring-Sleeve connectors.  
+
The ToneMatch® connection is specifically designed for a {{T1}}. The ToneMatch® cable is supplied with the {{T1}} and uses a male Ethercon connector at both ends.  
  
Note: A T1® connected to the the Analog input will require the optional {{T1}} power supply. See the {{Bose Accessories Page}} for details.
+
=== Analog Connection  ===
  
 +
The Analog connection is a ¼ inch phone jack. You can use this for a the second T1® using the T1® Analog Master output (¼ inch phone jack).
  
 +
This connection is made with a standard ¼ inch jack instrument cable. This can be Tip-Sleeve or Tip-Ring-Sleeve connectors.
  
[[Image:T1x2IntoModelII.gif]]
+
Note: A T1® connected to the the Analog input will require the optional [[T1 ToneMatch® Audio Engine power supply]]. 
 +
 
 +
<br>
 +
 
 +
[[Image:T1x2IntoModelII.gif]]  
  
 
----
 
----
[[Category:Model II]]
+
 
[[Category:T1]]
+
[[Category:Model_II]] [[Category:T1]]

Revision as of 11:46, 5 December 2008

The L1 Model II can accept two inputs.

Model II inputs

ToneMatch™ Connection

The ToneMatch® connection is specifically designed for a T1 ToneMatch Audio Engine. The ToneMatch® cable is supplied with the T1 ToneMatch Audio Engine and uses a male Ethercon connector at both ends.

Analog Connection

The Analog connection is a ¼ inch phone jack. You can use this for a the second T1® using the T1® Analog Master output (¼ inch phone jack).

This connection is made with a standard ¼ inch jack instrument cable. This can be Tip-Sleeve or Tip-Ring-Sleeve connectors.

Note: A T1® connected to the the Analog input will require the optional T1 ToneMatch® Audio Engine power supply


T1x2IntoModelII.gif