T1 ToneMatch® Audio Engine / Connections to Model II

The L1 Model II can accept two inputs.

This makes it easy for two performers to connect their own T1®s to a L1^® Model II Power Stand.

ToneMatch® Connection

The ToneMatch® connection is specifically designed for a T1 ToneMatch Audio Engine. The ToneMatch® cable is supplied with the T1 ToneMatch Audio Engine and uses a male Ethercon connector at both ends.

Analog Connection

The Analog connection is a ¼ inch phone jack. You can use this for a the second T1® using the T1® Analog Master output (¼ inch phone jack).

This connection is made with a standard ¼ inch jack instrument cable. This can be Tip-Sleeve or Tip-Ring-Sleeve connectors.

Note: A T1® connected to the the Analog input will require the optional T1 ToneMatch® Audio Engine power supply. 

---