T1 ToneMatch® Audio Engine / Daisy Chain / Model II

From Bose Portable PA Encyclopedia
Revision as of 00:20, 9 February 2015 by ST (talk | contribs) (New page: {{T1 ToneMatch® Audio Engine / Daisy Chain |L1 Model = {{Model II}} |L1 Model Port = ToneMatch® Port |L1 Model Image =Image:T1x2IntoModelIIa.gif }} ---- Category:Model II)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


You can daisy chain (connect) one T1 ToneMatch Audio Engine into another amplified through a L1 Model II

T1x2IntoModelIIa.gif

In this example we have two T1 ToneMatch Audio Engines. (T1®s)

  1. T1® on the left connected to the L1 Model II through the ToneMatch® Port
  2. T1® on the right connected to the T1® on the left through the Master Analog ¼ inch jack to the other T1® Channel 4

This allows the performer using T1® #1 to control the overall volume of both T1®s. If the performer controlling T1® # does not adjust the volume of Channel 4, Changing the Master Volume maintains the relative balance between T1® #1 and T1® #2


Notes:
{{{L1 Model Specific Notes}}}