T1 ToneMatch® Audio Engine / USB / Controlling the Volume

From Bose Portable PA Encyclopedia
Revision as of 07:00, 2 August 2008 by ST (talk | contribs) (New page: The default setup in the {{T1}} is that the USB from PC signal is routed to the Master output. If you need to set the volume relative to the other T1® Channels then you have to do that wi...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The default setup in the T1 ToneMatch Audio Engine is that the USB from PC signal is routed to the Master output. If you need to set the volume relative to the other T1® Channels then you have to do that with your USB device, probably a computer.

If you want to route the USB from PC to a T1® Channel, keep reading.

USB to PC

Prefs

  • Turn the main selector to Prefs.
  • Select USB from PC

[[Image:T1PrefsUSB.gif]


  • Set Left: Ch 4/5
  • Set Right: CH 4/5

T1USBfromPCCH45.gif

Now the volume is controlled by the Channel 4/5 Vol control.

Retrieved from "https://toonz.ca/bose/wiki/index.php?title=T1_ToneMatch®_Audio_Engine_/_USB_/_Controlling_the_Volume&oldid=8018"