T1 ToneMatch® Audio Engine / USB / Controlling the Volume

From Bose Portable PA Encyclopedia
Jump to: navigation, search

The default setup in the T1 ToneMatch Audio Engine is that the USB from PC signal is routed to the Master output. If you need to set the volume relative to the other T1® Channels then you have to do that with your USB device, probably a computer.

If you want to route the USB from PC to a T1® Channel, keep reading.

USB to PC

Prefs

  • Turn the main selector to Prefs.
  • Select USB from PC

T1PrefsUSB.gif


  • Set Left: Ch 4/5
  • Set Right: CH 4/5

T1USBfromPCCH45.gif

Now the volume of your USB device, relative to the other T1® Channels, is controlled by the Channel 4/5 Vol control.