Difference between revisions of "T4S to L1 Classic"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
(Created page with "#REDIRECT# T4S_Connection_to_L1_Model_I")
 
m
 
Line 1: Line 1:
#REDIRECT# [[T4S_Connection_to_L1_Model_I]]
+
{{:T4S_Connection_to_L1_Model_I}}

Latest revision as of 12:45, 30 January 2020

Classic This information is applicable to the L1® Classic
T4S This information is applicable to the T4S ToneMatch® mixer

T4S ToneMatch mixer to one L1 Classic/L1 Model I system

There's a slight difference because there are two 1/4 inch (6.3 mm) output jacks on the T4S for Left and Right Outputs.

You've got two ways to handle this:

  1. Pan all your inputs to one side (e.g. Right) and connect the T4S Right output to the L1® Classic Channel 3 (try setting the level to about 4)

    T4S Analog Right Output.png
    800
    OR
  2. Leave your inputs panned to center (the default setting), and connect


T4S Analog Outputs.png
800


When using a T1 ToneMatch Audio Engine or T4S ToneMatch mixer with the L1® Classic, you don't need to use the R1 Remote.

T4S ToneMatch mixer to two L1 Classic/L1 Model I systems

To run a T4S ToneMatch mixer with two L1 Model I or L1 Classic

On the T4S ToneMatch mixer Pan your inputs left and right as required, but for best results, pan your inputs to one side or the other, but not up the middle

T4S to two L1 Classic Model I.jpg

When using a T1 ToneMatch Audio Engine or T4S ToneMatch mixer with the L1® Classic, you don't need to use the R1 Remote.