T4S to L1 Model II

From Bose Portable PA Encyclopedia
Revision as of 01:38, 15 December 2022 by ST (talk | contribs) (Created page with "T4S to L1 Model 1I === T4S Settings === Note: The ToneMatch port used for power and signal to a single L1 Model II or L1 Model 1S is the RIGHT output. Ensure that the PAN set...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

T4S to L1 Model 1I

T4S Settings

Note: The ToneMatch port used for power and signal to a single L1 Model II or L1 Model 1S is the RIGHT output. Ensure that the PAN settings for each input are up the center or panned hard right. Any signal panned hard left will not be heard through the L1.

Connection

T4S to L1 Model 1S.png

ToneMatch Cable

ToneMatch Cable.jpg

The cable may have silver ends.

Retrieved from "https://toonz.ca/bose/wiki/index.php?title=T4S_to_L1_Model_II&oldid=23861"