T8S Aux Send Channel Inputs to Different Aux Outputs

How do I send each channel to a different Aux output or than one channel to more than one Aux output.

In this example, we will send:

• Channel 1 to Aux 1
• Channel 2 to Aux 2
• Channel 3 to Aux 3
• Channel 4 to Aux 1 and Aux 2

We will talk about how you route the signals here. To learn more about individual settings please see T8S Aux.

Turn the Rotary Selector to PAN/AUX

Channel 1 to Aux 1

1. Press Channel 1 CH EDIT
2. Turn Menu knob (the left most button under the display) until
   Aux Send 1 is highlighted.
3. Press the Menu knob
4. Press the middle button to change from
   Muted to Level 50% (you can fine tune this later)
5. Press the last button (right most button) and turn until you highlight
6. Post: After Fader (you can choose Dry or Pre if you prefer)
7. You're done with Channel 1 routed to Aux 1

Channel 2 to Aux 2

1. Press Channel 2 CH EDIT
2. Turn Menu knob (the left most button under the display) until
   Aux Send 1 is highlighted.
3. Press the Menu knob
4. Press the middle button to change from
   Muted to Level 50% (you can fine tune this later)
5. Press the last button (right most button) and turn until you highlight
6. Post: After Fader (you can choose Dry or Pre if you prefer)
7. You're done with Channel 2 routed to Aux 2

Channel 3 to Aux 3

1. Press Channel 3 CH EDIT
2. Turn Menu knob (the left most button under the display) until
   Aux Send 1 is highlighted.
3. Press the Menu knob
4. Press the middle button to change from
   Muted to Level 50% (you can fine tune this later)
5. Press the last button (right most button) and turn until you highlight
6. Post: After Fader (you can choose Dry or Pre if you prefer)
7. You're done with Channel 3 routed to Aux 3

Channel 4 to Aux 1 and Aux 2

1. Press Channel 4 CH EDIT
2. Turn Menu knob (the left most button under the display) until
   Aux Send 1 is highlighted.
3. Press the Menu knob
4. Press the middle button to change from
   Muted to Level 50% (you can fine tune this later)
5. Press the last button (right most button) and turn until you highlight
6. Post: After Fader (you can choose Dry or Pre if you prefer)
7. You're done with Channel 4 routed to Aux 1
   
   
8. Turn Menu knob (the left most button under the display) until
   Aux Send 2 is highlighted.
9. Press the menu knob
10. Press the middle button to change from
    Muted to Level 50% (you can fine tune this later)
11. Press the last button (right most button) and turn until you highlight
12. Post: After Fader (you can choose Dry or Pre if you prefer)
13. You're have sent Channel 4 routed to Aux 2 (as well as Aux 1)

---