T8S Aux Send Channel Inputs to Different Aux Outputs

From Bose Portable PA Encyclopedia
Revision as of 21:16, 4 August 2018 by ST (talk | contribs) (created article)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
How do I sent each channel to a different Aux output or than one channel to more than one Aux output.

Turn the Rotary Selector to PAN/AUX

Channel 1 to Aux 1
  1. Press Channel 1 CH EDIT
  2. Turn Menu knob (the left most button under the display) until
    Aux Send 1 is highlighted.
  3. Press the Menu knob
  4. Press the middle button to change from
    Muted to Level 50% (you can fine tune this later)
  5. Press the last button (right most button) and turn until you highlight
  6. Post: After Fader (you can choose Dry or Pre if you prefer)
  7. You're done with Channel 1 routed to Aux 1


Channel 2 to Aux 2
  1. Press Channel 2 CH EDIT
  2. Turn Menu knob (the left most button under the display) until
    Aux Send 1 is highlighted.
  3. Press the Menu knob
  4. Press the middle button to change from
    Muted to Level 50% (you can fine tune this later)
  5. Press the last button (right most button) and turn until you highlight
  6. Post: After Fader (you can choose Dry or Pre if you prefer)
  7. You're done with Channel 2 routed to Aux 2


Channel 3 to Aux 3
  1. Press Channel 3 CH EDIT
  2. Turn Menu knob (the left most button under the display) until
    Aux Send 1 is highlighted.
  3. Press the Menu knob
  4. Press the middle button to change from
    Muted to Level 50% (you can fine tune this later)
  5. Press the last button (right most button) and turn until you highlight
  6. Post: After Fader (you can choose Dry or Pre if you prefer)
  7. You're done with Channel 3 routed to Aux 3


Channel 4 to Aux 1 and Aux 2
  1. Press Channel 4 CH EDIT
  2. Turn Menu knob (the left most button under the display) until
    Aux Send 1 is highlighted.
  3. Press the Menu knob
  4. Press the middle button to change from
    Muted to Level 50% (you can fine tune this later)
  5. Press the last button (right most button) and turn until you highlight
  6. Post: After Fader (you can choose Dry or Pre if you prefer)
  7. You're done with Channel 4 routed to Aux 1

  8. Turn Menu knob (the left most button under the display) until
    Aux Send 2 is highlighted.
  9. Press the menu knob
  10. Press the middle button to change from
    Muted to Level 50% (you can fine tune this later)
  11. Press the last button (right most button) and turn until you highlight
  12. Post: After Fader (you can choose Dry or Pre if you prefer)
  13. You're have sent Channel 4 routed to Aux 2 (as well as Aux 1)