T8S to L1 Compact

From Bose Portable PA Encyclopedia
Jump to: navigation, search

L1 Compact
T8S This information is applicable to the T8S ToneMatch® mixer

Introduction

Here's a quick overview of how you can connect a T8S ToneMatch mixer to an L1 Compact


Connections


T1 ToneMatch® Audio Engine power supply

Use a 1/4 inch Tip-Ring-Sleeve cable for best results

14trstotrs.jpg

Settings

On the L1 Compact:

  • Set the channel volume off for channel 1
  • Set the channel volume off for channel 2
  • Turn on the T8S ToneMatch mixer
  • Set the Rotary Selector to PAN/AUX
  • Press the CH EDIT button for each channel you are using and pan the input hard RIGHT
  • Note: Steps 1 and 2 above are one-time-only. You don't have to change this unless you get another L1 Compact and want to run in stereo

Control the overall volume with the T8S ToneMatch mixer master volume.

If you see the L1 Compact clipping (red light) or you hear audible distortion, turn down the Master Volume on the T8S. If you still see clipping on the L1 Compact turn down the volume on L1 Compact channel 2.

If you have questions, please join the conversation in the Bose Portable PA Community.