Difference between revisions of "Template:L1 Pro"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m (Articles)
m (Resources)
Line 37: Line 37:
 
=== Documentation ===
 
=== Documentation ===
 
{{L1 Pro Documentation}}
 
{{L1 Pro Documentation}}
 +
 +
=== L1 Pro Firmware ===
 +
[[L1 Pro Firmware]]
 +
  
 
=== Resources ===
 
=== Resources ===

Revision as of 10:09, 8 April 2023

L1 Pro This information is applicable to the L1 Pro

Documentation



L1 Pro Firmware

L1 Pro Firmware


Resources

L1 Pro Application Guide

Bose Portable PA Brochure

L1 Pro Family Selection Guide (product comparison)

Choosing the L1 Pro System That's Right for You (Youtube) / (Facebook livecast)

Bose L1 Pro Overview Videos

Bose L1 Pro Technical Training Videos

L1 Pro and the Mobile DJ - video

Bose Pro Portable PA Community

L1 Pro Technical Certification Course (no charge, but you must register)

Articles

Should I get an L1 Pro8 or L1 Pro16?

Should I get an L1 Pro16 or L1 Pro32?

Do I Need to Upgrade from the L1 Compact to the L1 Pro8?

Do I Need to Upgrade from the L1 Model II to the L1 Pro32?

L1 Pro Do You Need All Three

Which L1 Pro for Singer/Songwriter/Electric Guitarist

T1 Compatibility With L1 Pro Systems

L1 Pro and SimpleSync Connect L1 Pro to Bose Smart Speaker Group

L1 Pro32 Separating the Sections of the Mid-High Array

L1 Pro16 Wobble

Comparing Specifications

Comparing L1 Pro Models

Bose L1 Pro8 Compared to L1 Pro16

Bose L1 Pro16 Compared to L1 Pro32

Comparing L1 Pro Power Stands to Subs

Sub Comparison

Legacy to L1 Pro Models

Bose L1 Compact Compared to L1 Pro8

Bose L1 Model 1S Compared to L1 Pro16

Bose L1 Model II Compared to L1 Pro32

Throw Over Distance

Quick Tips

L1 Pro Line Out

The XLR Line Output from any L1 Pro contains the sound from all inputs (1, 2, 3, Bluetooth, and ToneMatch Port). That includes

  • ToneMatch Presets
  • Tone Controls
  • Reverb
  • The signal from a ToneMatch mixer connected to the ToneMatch port including ToneMatch Presets, zEQ, Reverb, Effects.

The sound is NOT affected by the L1 Pro System EQ setting.



L1 Pro Daisy Chain

Want to connect one or more L1 Pro systems together? See L1 Pro Daisy Chain

L1 Pro System EQ

The System EQ feature on the L1 Pro systems applies an EQ preset to the master output. This is similar to a graphic equalizer on traditional analogue mixers, but it uses four presets instead for quick access. read more — L1 Pro System EQ

L1 Pro32 Half Stack

Can I operate the L1 Pro32 with only the lower section of the line array?
Sometimes there is not sufficient height to use the full array
Yes
The L1 Pro32 can be used without the upper array. This configuration is useful when a venue ceiling cannot accommodate the height of the L1 Pro32
Source: Page 7 of the L1 Pro32 Owners Guide
  • For best results, ensure array is at ear level for listeners
  • Unlike the L1 Model II, the L1 Pro32 automatically adjusts the level of the bass output to maintain the appropriate spectral balance.
It’s a valid use case to use only the bottom array section. In fact, the EQ automatically adjusts to compensate.
Craig Small - Bose


Half Stack Not Recommended for Small Gigs

Running only the lower section of the Line Array is a workaround when there isn't enough ceiling clearance to use both sections. For small gigs, turn down the volume on the L1 Pro32, don't run without the top section of the array because

  • You'll need to elevate the system so the array is at ear level for the audience. Otherwise, the sound will be muffled
  • You will reduce your projection over distance. The sound will drop off more over distance.
  • You may need to turn up the volume louder than if you were using the full array. As a result, you increase the likelihood of feedback.

Sub1/Sub2

Sub1 Sub2 This information is applicable to the Sub1/Sub2

Sub1/Sub2‎‎

Sub Comparison

S1 Pro with Sub1 or Sub2

L1 Mix App

It's L1 Pro control in your pocket. With the L1 Mix app, you can access intuitive, wireless control of your Bose L1 Pro portable PA system.


Read more and get the app here: L1 Mix App

Tip

Run your finger up and down over the dials (as though they were sliders). Don't try to follow the curve.

L1 Mix App Controls.jpg

ToneMatch Mixers

T4S This information is applicable to the T4S ToneMatch® mixer
T8S This information is applicable to the T8S ToneMatch® mixer

Engineered with a powerful DSP engine and intuitive user control, the T4S/T8S ToneMatch mixers offer studio-quality EQ, dynamics and effects. Sound great with integrated BoseToneMatch processing and zEQ, especially when connected to a Bose L1 or F1 system for full end-to-end tonal control.

read more — T4S/T8S ToneMatch® Mixers

Other Bose Portable PA Products

L1 Legacy F1 S1 Pro