Difference between revisions of "Template:S1 Pro Gain Staging"
m |
m |
||
| Line 1: | Line 1: | ||
| − | For each channel you are using on the S1 | + | For each channel you are using on the {{S1}} |
# Turn the channel volume off | # Turn the channel volume off | ||
# Connect your sound source | # Connect your sound source | ||
| Line 6: | Line 6: | ||
#* On digital consoles this may be marked as '''-18 dBFS<ref>[https://en.wikipedia.org/wiki/DBFS dBFS]</ref><ref>[http://avres.com/blog/dbu-vs-dbfs.html dBU vs dBFS]</ref>'''. The exact value (-18 dBFS to -20 dBFS) may vary depending your location<ref>[https://en.wikipedia.org/wiki/DBFS#Analog_levels dBFS Analog Levels]</ref>. | #* On digital consoles this may be marked as '''-18 dBFS<ref>[https://en.wikipedia.org/wiki/DBFS dBFS]</ref><ref>[http://avres.com/blog/dbu-vs-dbfs.html dBU vs dBFS]</ref>'''. The exact value (-18 dBFS to -20 dBFS) may vary depending your location<ref>[https://en.wikipedia.org/wiki/DBFS#Analog_levels dBFS Analog Levels]</ref>. | ||
#* Refer to the manual for the {{{Device|source device}}} for details. | #* Refer to the manual for the {{{Device|source device}}} for details. | ||
| − | #* If the {{{Device|source device}}} does not have metering or indicators, set the output as high as you can without hearing distortion or seeing red | + | #* If the {{{Device|source device}}} does not have metering or indicators, set the output as high as you can without hearing distortion or seeing red indicator lights. |
# While playing/singing as loud as you will during your performance, bring up the channel volume until you see solid green on the channel indicator light. Occasional flickers of red are okay. If you see solid red or you hear distortion, turn down the volume. | # While playing/singing as loud as you will during your performance, bring up the channel volume until you see solid green on the channel indicator light. Occasional flickers of red are okay. If you see solid red or you hear distortion, turn down the volume. | ||
Revision as of 12:48, 7 June 2019
For each channel you are using on the S1 Pro System
- Turn the channel volume off
- Connect your sound source
- Adjust the volume of the source device output to the reference or nominal output level.
- On analog consoles this may be marked as unity or 0 dB.
- On digital consoles this may be marked as -18 dBFS[1][2]. The exact value (-18 dBFS to -20 dBFS) may vary depending your location[3].
- Refer to the manual for the source device for details.
- If the source device does not have metering or indicators, set the output as high as you can without hearing distortion or seeing red indicator lights.
- While playing/singing as loud as you will during your performance, bring up the channel volume until you see solid green on the channel indicator light. Occasional flickers of red are okay. If you see solid red or you hear distortion, turn down the volume.