View source for Template:TC-Helicon VoiceSolo FX150 to L1®

<noinclude>
Usage:
<pre>
{{TC-Helicon to L1®
|L1=[[Compact]]
|Model parameter 1= [[Compact#Channel_1|Compact Channel 1]]
|Model parameter 2= [[Compact#Channel_2|Compact Channel 2]]
|TCH=[http://www.tc-helicon.com/products/voicelive-play-gtx/ VoiceLive Play GTX]
|TCH Image = {{#img: image=Voicelive-play-gtx_top.jpg |page=http://www.tc-helicon.com/products/voicelive-play-gtx| height=250px |title=TC-Helicon VoiceLive Play GTX }}
|TCH Additional Note =  so I don't have to touch the {{{L1}}} once I'm set up.
}}
</pre>
</noinclude>
<!--
{{Compact icon}}{{Model 1S icon}}{{Model II icon}}
-->
<html><div style="float:right; padding-top:60px"></html>{{{TCH Image|{{#img: image=Voicelive-play-gtx_top.jpg |page=http://www.tc-helicon.com/products/voicelive-play-gtx| height=250px |title=TC-Helicon VoiceLive Play GTX }}}}}<html></div></html>
<noinclude>=== [[Compact]] ===</noinclude>
The {{{TCH}}} Output has a button beside it marked: "Full Mix". Use that (button up)

I prefer to use an adapter (XLR to &frac14; inch jack) from the {{{TCH}}}  Main out - to {{{Model parameter 2|Compact Channel 2}}}.  That way you don't have to work around the {{{L1}}}'s internal microphone Preset. 

{{#img: image=Compact_Channel_2_Line_Level.png |page=Compact#Channel_2| width=400px |title=Compact Channel 2}}

Use the {{{TCH}}} individual volume control to control the mix, and the master volume for the overall output of the system.   It's nice to use just one cable from the {{{TCH}}} to the {{{L1}}}.  This also keeps the {{{Model parameter 1|Compact Channel 1}}} free in case I need to plug in another microphone.

I use an adapter like this
<!--
* [http://www.musiciansfriend.com/accessories/planet-waves-xlr-female-to-1-4-female-adapter xlr female to 1/4 female adapter][[Image:XLRTo14female.png|right]]

* [http://www.audiopile.net/products/Adaptors_Connectors/NEUTRIK/NA3FJ/NA3FJ_cutsheet.shtml NA3FJ Neutrik 3 Pin XLR Female to 1/4" TRS Female Locking Barrel Adapter] [[Image:NeutrikNA3FJ.jpg|right]]
-->
<table><tr><td>Neutrik NA3FJ XLR to &frac14; inch jack Tip-Ring-Sleeve female</td><td> or </td><td>Planet Waves XLR female to &frac14; inch jack Tip-Ring-Sleeve female</td></tr>
<tr><td>
{{#img: image=NeutrikNA3FJ.jpg |page=http://www.audiopile.net/products/Adaptors_Connectors/NEUTRIK/NA3FJ/NA3FJ_cutsheet.shtml| width=300px |title=NA3FJ Neutrik 3 Pin XLR Female to 1/4" TRS Female Locking Barrel Adapter}}
</td><td>&nbsp;</td><td>
{{#img: image=XLRTo14female.png |page=http://www.musiciansfriend.com/accessories/planet-waves-xlr-female-to-1-4-female-adapter| width=300px |title=xlr female to 1/4 female adapter}}
</td></tr>
</table>


WITH

<table><tr><td>Balanced &frac14; inch jack Tip-Ring-Sleeve cable</td><td> or </td><td>Unbalanced &frac14; inch jack Tip-Sleeve cable</td></tr>
<tr><td>
{{#img: image=TRStoTRS.jpg |page=http://www.audiopile.net/products/Mic_Instr_Cables/IP-101/IP-101_cutsheet.shtml| width=300px |title=&frac14; inch jack Tip-Ring-Sleeve }}
</td><td>&nbsp;</td><td>

{{#img: image=TSUnbalanced.jpg  |page=http://www.audiopile.net/products/Mic_Instr_Cables/GBNC/GBNC_SOON_cutsheet.shtml| width=300px |title=&frac14; inch jack Tip-Sleeve }}
</td></tr>
</table>


OR a longer version of a cable like this:


[[Image:XLR to TRS mp106.jpg]]

[http://www.audiopile.net/MP-105 Source: Audiopile.net]

Technical Description:

The EWI MP-105 is a special application adaptor cable for converting XLR to 1/4 TRS.  This cable is typically used to plug XLR cord into balanced 1/4" TRS panel jacks commonly found on mixing consoles and processing equipment. 

The Female XLR end is wired through to the 1/4" Male TRS end as follows:

*    Pin One FXLR to Sleeve of MTRS
*    Pin Two FXLR to Tip of MTRS
*    Pin Three FXLR to Ring of MTRS

The 1/4" MTRS end is an EWI model P292S-BKG

The FXLR end is an EWI model ES3FB-GDP

The cable itself is constructed with 99.98% pure 22ga. high strand count copper conductors.



TO

{{{Model parameter 2}}}

<!--
[[Image:Compact_Channel_2_Line_Level.png]]
-->