View source for L1® Classic and Model I Acoustical Output

<noinclude>{{Bose Reviewed}}</noinclude>
The maximum output volume of the {{Classic}} and the {{Model I}} are virtually identical.

In the {{Classic}}, the {{L1 CR}} is powered by two (2) 250 Watt amplifiers. In the Model I, the {{L1 CR}} is powered by one (1) 250 Watt amplifier. Both the Classic and the Model I use a second 250 Watt amplifier to power one or two B1 bass modules.

Although these numbers serve as a point of reference they do not tell the whole story. During the design of the {{Model I}} the impedance of the {{L1 CR}} was lowered. As a result of the lower impedance, a single 250W amplifier now powers the system to within 1.75 dB of the max SPL of the {{Classic}}. Several other changes were made to the signal processing and acoustical sections to further reduce this small difference. Particular attention was paid to this change and many A/B comparisons were conducted by Bose to confirm that there was no significant audible difference between the two systems. 

<noinclude>
----

[[Category:Classic]]
[[Category:Model I]]
</noinclude>