View source for L1® Compact / Connection from a Mixer

===Summary=== 
You can run a stereo source to the 1/8 input or the RCA jack inputs. 

If you have a mixer with a &frac14; jack output that can be switched to mono this should work well. You can used &frac14; inch jack  cables. Balanced or unbalanced will work fine. 

==== Stereo Sources ====
If you have a stereo source use the 1/8 inch stereo connection or the RCA jack inputs. Examples of stereo sources:
* iPod or other personal stereo device
* Portable CD player
* Home stereo CD or Video deck
* Some DJ mixers use RCA Jack outputs

'''DO NOT use a stereo &frac14; inch jack Tip-Ring-Sleeve connection'''. You may suffer significant signal loss. If you use a stereo source then use the 1/8 inch stereo connection or the RCA jack inputs.


==== Mixers ====

You need a mono output from the mixer to {{Compact}} Channel 2 &frac14; inch jack

=== &frac14; inch jack Cables ===
You can use TS (Tip Sleeve) unbalanced cables, OR TRS (Tip Ring Sleeve) balanced cables. If the cable uses &frac14; inch jack plugs and the ends are the same, then the cable should be fine. 

NOTE: '''DO NOT use a stereo''' &frac14; inch jack Tip-Ring-Sleeve connection. You may suffer significant signal loss. If you must make a stereo connection then use the 1/8 inch stereo connection or the RCA jack inputs. 

{{#lst:T1 ToneMatch® Audio Engine / 1/4 inch Output Connections to L1® Family Members|Balanced}}

=== Channel 2 Connection from {{T1}} Details ===
[[Image:Compact Channel 2 Line Level.png]]


----
[[Category:Compact]]
[[Category:Mixer to Compact]]