View source for Mackie Pro FX4 to S1 Pro System

{{S1 icon}}
[[File:Mackie Pro FX4 v2.png.png|400px|link=http://mackie.com/sites/default/files/PRODUCT%20RESOURCES/MANUALS/Owners_Manuals/ProFX4v2_OM.pdf|right|Mackie ProFX4 v2]]

== Introduction ==
Here's a link to the [http://mackie.com/sites/default/files/PRODUCT%20RESOURCES/MANUALS/Owners_Manuals/ProFX4v2_OM.pdf Mackie ProFX4 v2 Owners Manual].

The MAIN outputs from this mixer are balanced, 1/4 inch (6mm) Tip-Ring-Sleeve connections. 
{{1/4 TRS to 1/4 TRS x2}}

You've got a couple of choices.

===Two cable connection===
On the Mackie mixer
# Connect channels 1, 2, 3/4 using left and right side as required
# Connect left and right Outputs to S1 Pro channels 1 and 2
# Use 1/4 inch Tip-Ring-Sleeve cables.


===Single cable connection===
On the Mackie mixer
# Connect channels 1, 2
# Connect channel 3 input using only left side
Issues
# You won't be able to use channel 4
# This will not work if you use the RCA inputs for tape in
# Connect left output to the S1 Pro (either channel 1 or 2)
# Use a 1/4 inch Tip-Ring-Sleeve cable

== S1 Pro System Settings ==
{{S1 Pro Mixer Settings}}

== Stereo with two S1 Pro Systems==
If you have two S1 Pro systems, connect one to each of the MAIN OUTPUTS (Left and Right)


== Notes ==
The Mackie ProFX4 v2 mixer is stereo. The S1 Pro System is mono. To get the full output of the Mackie mixer to the S1 Pro, we need to connect both Left and Right outputs from the Mackie to the S1 Pro.


----
[[Category:S1 Pro]]
[[Category:Mixer]]
[[Category:Mackie]]