View source for Mixer / Yamaha / MG8/2FX

{{Classic icon}}{{Model I icon}} 
<big>'''Yamaha MG8/2FX Mixer and MG10/2 Mixer'''</big>

== Summary ==
Simplest thing that could possibly work.

'''Use the ¼ inch phone jack (Tip-Sleeve) outputs to the PS1 Powerstand, Channels 1 or 2 if you want to use the presets and the Tone and Level Controls on the R1 Remote '''


== Outputs ==
<!-- delete anything that is not applicable -->

=== &frac14; Inch with suitable output===
for PS1 Powerstand Channel 1 or 2 inputs

{{RunTROrTRSUnbalanced}}


Links:
* [http://www2.yamaha.co.jp/manual/pdf/pa/english/mixers/mg8_2fxe.pdf MG8/2FX Manual]
* [http://www2.yamaha.co.jp/manual/pdf/pa/english/mixers/MG10_2E.pdf MG10/2 Manual]
* From page 18 of the manual (19 for the MG10/2)
http://bose.infopop.cc/eve/forums/a/ga/ul/4261046553/inlineimg/Y/YamahaMG82Out.gif
* 
Specifications for the MG10/2, MG82FX
<html><pre>
OUTPUT CHARACTERISTICS MG8/2FX
Connection 	Actual
Source
Impedance 	For Use With
Nominal 	Output Level *1 	Connector
In Mixer
Nominal 	Max. before Clip
ST OUT [L, R] 	150 Ω 	10 kΩ Lines 	+4 dBu (1.23 V) 	+24 dBu (12.3 V) 	Phone Jack (TRS) *6
AUX SEND 	150 Ω 	10 kΩ Lines 	+4 dBu (1.23 V) 	+20 dBu (7.75 V) 	Phone Jack (TRS) *6
CH INSERT OUT (1 – 2) 	150 Ω 	10 kΩ Lines 	0 dBu (0.775 V) 	+20 dBu (7.75 V) 	Phone Jack (TRS) *5
2TR OUT [L, R] 	600 Ω 	10 kΩ Lines 	-10 dBV (245 mV) 	+10 dBV (2.45 V) 	RCA Pin Jack
</pre>
</html>

More Notes




----
<references/>

[[category:Mixer]]

[[Category:Yamaha]]