View source for PS1 Powerstand Connections/Line Out/XLR

== Line Outs (XLR balanced) for Channels 1 and 2 ==
* post trim (+4 dBu nominal)
For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal). 

[[Image:PS1LineOutXLR.jpg]]

This is not suitable for connection to another {{PS1}} as the output level is too high for a {{PS1}} Channel 1 or 2 input. If you want to connect one {{l1 nl}} to another please see: 
[[PS1 Powerstand / Daisy Chain]]
----
<references/>
 

[[category:L1® System]]
[[category:PS1 Powerstand]]
[[category:PS1 Powerstand Connections]]