View source for T1 ToneMatch® Audio Engine / Connections to Compact

{{T1 icon}}{{Compact icon}}

<table><tr>
<td valign="top" width="250">__TOC__</td>
<td valign="top">
;Applicability
:This article covers connections from the {{T1}} Master Output or Aux Output to the {{Compact}}.  You will connect to {{Compact}} channel 2 {{1/4 TRS}}. Connecting to the {{Compact}} Channel 1 is not recommended because that channel has a built-in vocal microphone {{ToneMatch}} Preset.

; Power for the {{T1}}
:Please note: You will need a [https://www.bose.com/en_us/products/speakers/speaker_accessories/l1_tonematch_powersupply_acc.html#v=l1_tonematch_powersupply_acc_black ToneMatch Power Supply] to run the {{T1}}.

;Cables
[[File:14trstotrs.jpg|200px|right|{{1/4 TRS}}]]
:The {{T1}} Analog Outputs and the {{S1}} 1/4 inch (6 mm) inputs are '''balanced'''. For best results use a {{1/4 TRS}} cable for a balanced connection. You can use a {{1/4 TS}} cable, but you will lose up to -6 dB in signal strength and you may pick up line noise.

</td>
</tr></table>  




== T1® to Compact Channel 2 ==
{{:T1 ToneMatch® Audio Engine to Compact}}


{{Two T1®s to Compact}}

<noinclude>For more general information see:  {{T1}} and {{Compact}}
----
[[Category:Compact]]
[[Category:T1]]
[[Category:Daisy Chain]]
[[Category:Connections]]

</noinclude>