View source for T1 to T8S to Two L1 Model II

<html><style>
img {
  max-width: 100%;
  height: auto;
}
</style>
</html>
{{Model II icon}}{{T8S icon}}{{T1 icon}}
This is an example of how you can connect a {{T1}} to a {{T8S}} to two {{Model II}} systems.

This assumes that you will run the {{T1}} output as mono. 

=== T1 Power ===
You won't be connecting the T1 to a power stand so you will need a [[T1 ToneMatch® Audio Engine power supply]].

== Connect the {{T1}} Master Output to {{T8S}} Aux Input Channel 9==

Connecting to Aux Input Channel 9 leaves all eight full featured channels available for other inputs. You will need to control T1 Pan and Level using the T8S PAN/AUX settings.

[[File:T1 to T8S to L1 Model II x 2.png]]

{{Balanced TRS from T1 to T8S}}

=== {{T8S}} PAN/AUX Input Settings ===

{{T4S/T8S Aux Inputs}}

On the {{T8S}} on the PAN/AUX setting for Aux Input (Channel 9) set the Pan to Left, Right, or Center as required. Center will send the {{T1}} output to both {{Model II}} systems.

== Connect the {{T1}} Master Output to {{T8S}} Channel 8==

Connecting to Channel 8 (or 1, 2, 3, 4, 5, 6, or 7) allows you to route the signal from the {{T1}} to the [[T8S Aux Outputs]]. This is appropriate if you need to hear the output of the {{T1}} through monitors connected to the {{T8S}} Aux outputs.  

[[File:T1 to T8S to L1 Model II x 2 Channel 8.png]]

{{Balanced TRS from T1 to T8S}}

=== {{T8S}} Aux Output Settings ===
Please see: [[T8S Aux Outputs]]

== L1 Model II Gain Staging ==
For each {{Model II}} 

{{L1 Model II Analog Input Gain Staging|Device={{T8S}}}}

----
[[Category:T1]]
[[Category:T8S]]
[[Category:Model II]]
[[Category:Connections]]
[[Category:Daisy Chain]]