View source for Template:T1® Microphone Stand Bracket Tips

{{T1 icon}}

Here's how I have one of my microphone stands setup. The T1® Microphone Stand Bracket is attached and I never remove it. 

All the cables are also strapped to the microphone stand. I leave the cables attached all the time. This saves a great deal of time during setup and teardown. 
<!--
[[Image:T1 on Mic Stand Adapter.jpg]]

-->

[[Image:T1 on Mic Stand Adapter 2.jpg]]

I used a white background so that you could see the wires. Normally they don't stand out like this visually. Notice that even if the T1® were to get knocked off the bracket the cables are acting as safety tethers. 

;View from the Back

[[Image:T1 on Mic Stand Adapter Back.jpg]]

;Ready to Pack Up

You can see that the cables are strapped to the microphone stand. 

[[Image:T1 Mic Stand Adapter Ready to Pack.jpg]]

;Packed, ready to  zip up

[[Image:T1 Mic Stand Adapter Packed.jpg]]

The black bag is one of the original Cylindrical Radiator&reg; bags that came with my L1®. Years ago I got some heavy duty bags for the Cylindrical Radiator&reg; and it turns out that the stock bags work great for holding microphone and light stands.

;Remember to pack the Bracket (arm) in the T1® Lid.

[[Image:T1 Mic Stand Adapter Arm.jpg]]


<noinclude>[[Category:T1]]</noinclude>