Search results

Jump to: navigation, search

Page title matches

  • {{L1 Model II with Sub1/Sub2}}
    30 bytes (6 words) - 20:29, 5 December 2023
  • .../en_us/solutions/portable/l1-pro-family/sub1-sub2.html|thumb|Bose Sub1 and Sub2]] * Sub2 plays lower and louder (down to 37 Hz)
    6 KB (939 words) - 11:38, 20 July 2024
  • ...od was to route all sound sources to the Sub1/Sub2 first and from the Sub1/Sub2 to the {{S1 Pro}}. This is because the {{S1 Pro}} did not have the Sub EQ m ...Q and use the {{S1 Pro+}} Line Out to send a full range signal to the Sub1/Sub2.
    3 KB (527 words) - 11:30, 31 July 2024
  • === L1 Model II with Sub1/Sub2 === #Connect the T1 Main Output to the Sub1/Sub2
    2 KB (456 words) - 11:45, 18 August 2024

Page text matches

  • Stack two Sub1 or Sub2 subwoofers in Cardioid Mode for focused, directional performance with reduc ...the subwoofer stack. This configuration is possible with both the Sub1 and Sub2 modules when stacked with an identical module as seen to the left. This can
    4 KB (743 words) - 03:49, 20 September 2024
  • ;Question: Does the L1 Pro16 bass output compare with the L1 Pro Sub2? ;Answer: Bose Professional: Yes, same 10x18-in RaceTrack subwoofer. Sub2 has additional acoustic volume, which helps it achieve lower tuning, but th
    1 KB (217 words) - 16:29, 31 December 2020
  • == Sub1/Sub2 == [[Sub1/Sub2‎‎]]
    5 KB (911 words) - 20:05, 30 July 2024
  • ...m to a Bose Sub1 or Sub2 Powered Bass Module, refer to the Bose Sub1 & Sub2 Powered Bass Module Owner’s guide. Visit the Bose Portable PA support sec
    12 KB (2,055 words) - 19:03, 31 July 2024
  • ...d subwoofer, but for optimal performance, Bose recommends the Bose Sub1 or Sub2 Powered Bass Module. ...od was to route all sound sources to the Sub1/Sub2 first and from the Sub1/Sub2 to the {{S1 Pro}}. This is because the {{S1 Pro}} did not have the Sub EQ m
    1 KB (215 words) - 11:53, 1 August 2024
  • == S1 Pro with Sub1 or Sub2==
    14 KB (2,216 words) - 13:29, 31 July 2024
  • ...d subwoofer, but for optimal performance, Bose recommends the Bose Sub1 or Sub2 Powered Bass Module for optimal performance. ...s to route all sound sources to the Sub1/Sub2 first and then from the Sub1/Sub2 to the S1 Pro system. The {{S1 Pro}} does not have the Sub EQ mode.
    12 KB (2,031 words) - 12:09, 9 August 2024
  • The total assembled system weight with Sub2 79.3 lb (36.4 kg) Sub2 50.7 lb (23.4 kg)
    4 KB (579 words) - 16:26, 23 September 2023
  • ...rovides on its own, Bose recommends you use add a Bose [[Sub1/Sub2|Sub1 or Sub2]] or get one of the larger [[L1 Pro|L1 Pro systems]].
    2 KB (308 words) - 15:44, 19 May 2022
  • **Sub1/Sub2|Sub1/Sub2
    922 bytes (130 words) - 19:15, 30 July 2024
  • ...ticle is applicable to all Bose bass modules and subwoofers (B1, B2, Sub1, Sub2).
    10 KB (1,856 words) - 20:49, 13 July 2021
  • File:Sub1Sub2 Level Control.jpg
    [[Category:Sub1 Sub2]]
    (1,680 × 956 (97 KB)) - 03:25, 30 April 2021
  • #REDIRECT [[Template:S1 Pro with Sub1 or Sub2]]
    47 bytes (8 words) - 00:07, 6 May 2021
  • {{S1 Pro with Sub1 or Sub2}}
    28 bytes (6 words) - 00:18, 6 May 2021
  • #REDIRECT [[S1 Pro with Sub1 or Sub2]]
    38 bytes (7 words) - 07:18, 6 May 2021
  • {{Sub1/Sub2 Level Control}}
    27 bytes (4 words) - 21:00, 19 May 2021
  • ...icable to the Sub1/Sub2" title="This information is applicable to the Sub1/Sub2"></a></div></html>
    310 bytes (54 words) - 21:06, 19 May 2021
  • #REDIRECT [[Sub1/Sub2]]
    23 bytes (3 words) - 00:15, 20 May 2021
  • {{Sub icon}}[[Sub1/Sub2]]
    7 KB (1,043 words) - 01:40, 22 May 2021
  • {{Template:Sub2 with Sub1}}
    27 bytes (4 words) - 12:45, 27 May 2021

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)