View source for Model 1S Model II Cylindrical Radiators

==== Cylindrical Radiator&reg;s ====
===== Top Section =====
Top sections are physically identical (same dimensions). 

Note: The actual model designation is on the label on the back channel. 
* Top array 39.63” H x 4.15” W x 4.13” D  (100.6 cm x 10.6 cm x 10.5 cm) 
** Model 1S has silver background
** Model II has black background

[[Image:Model 1s Model II CR02.jpg]]

===== Lower Section =====
Lower sections are physically different (Model 1S is 3.9" shorter). 
** Model 1S is approximately 39.63” H x 4.15” W x 4.13” D  (100.6 cm x 10.6 cm x 10.5 cm) 
** Model II is approximately 43.5” H x 4.15” W x 4.13” D (111.0  mm x 9.0 cm x 10.5 cm)

;Close up view of the ends (Model 1S on top, Model II below)

[[Image:Model 1s Model II CR01.jpg]]

; Top caps are identical
[[Image:Model 1s Model II CR03.jpg]]

==== Questions ====
Q: Can I use the Model 1S lower extension (no drivers) in the Model II with the Model II Cylindrical Radiator&reg; top section?  
:A: No. No sound will come out from the top section.

<noinclude>----
[[Category:Model 1S]]
[[Category:Model II]]</noinclude>