View source for S1 Pro System LEDs

<div class="tocdiv">
    <div>__TOC__</div>
    <div><h2>Introduction</h2>
There are two power related LEDs: <b>Power</b>  on the front of the system and <b>Battery Status</b> on the back of the system next to the power switch.

There are three LEDs for signal input.

There is one LED for Bluetooth.            
    </div>
</div>  
 
==S1 LED status==
===Power LED=== 
<br /> 
<table border="0" cellpadding="1" cellspacing="1" style="width: 33%;"> 
<caption>Power LED on the front of the unit </caption>

  <tr> 
   <td width=35%><strong>Off</strong></td> 
   <td>System is off</td> 
  </tr> 
  <tr> 
   <td><strong>Blue</strong></td> 
   <td>System is on</td> 
  </tr> 
  <tr> 
   <td><strong>Blue (flashing)</strong></td> 
   <td>System is in low power sleep mode<br>Happens after dormant for an hour<br>Resumes automatically when an audio signal is present</td> 
  </tr> 
  <tr> 
   <td><strong>Red</strong></td> 
   <td>System fault</td> 
  </tr> 

</table> &nbsp; 
=== Battery LED indicator===
If using the battery  the LED next to the system power switch shows the battery's charge state by flashing when powered on. To check the charge at any time, double-press the 
<em>Bluetooth</em> button in the Input 3 section.
<br /> &nbsp; 
<table border="0" cellpadding="1" cellspacing="1" style="width: 40%;"> 

  <tr> 
   <td width=35%>Blue - 4 flashes</td> 
   <td>75 - 100% charge</td> 
  </tr> 
  <tr> 
   <td>Blue -&nbsp;3 flashes</td> 
   <td>50 - 74% charge</td> 
  </tr> 
  <tr> 
   <td>Blue - 2 flashes</td> 
   <td>25 - 49% charge</td> 
  </tr> 
  <tr> 
   <td>Blue - 1 flash - may appear to be flashing</td> 
   <td>10&nbsp;- 24% charge</td> 
  </tr>
<!-- 
  <tr> 
   <td><strong>Blue - Blinking</strong></td> 
   <td>Early warning about battery depletion</td> 
  </tr> 
-->
  <tr> 
   <td>Red&nbsp;- 1 flash</td> 
   <td>Less than 10% charge</td> 
  </tr> 
<!--
 <tr> 
   <td>Solid Red</td> 
   <td>Battery depleted </td> 
  </tr> 
-->

</table>

<h3>Signal LED</h3> There are 3 signal LEDs: one above the volume knob for Inputs 1, 2 and 3.
<br /> &nbsp; 
<table border="0" cellpadding="1" cellspacing="1" style="width: 33%;"> 

  <tr> 
   <td width=35%><strong>Off</strong></td> 
   <td>No or low level signal present</td> 
  </tr> 
  <tr> 
   <td><strong>Green</strong></td> 
   <td>Signal present</td> 
  </tr> 
  <tr> 
   <td><strong>Red</strong></td> 
   <td>Signal clipping</td> 
  </tr> 

</table> 


<h3>Bluetooth LED</h3> The Bluetooth LED is located on the Bluetooth button under Input 3 on the connection / control panel.
<br /> &nbsp; 
<table border="0" cellpadding="1" cellspacing="1" style="width: 40%;"> 

  <tr> 
   <td width=35%><strong>Off</strong></td> 
   <td>Bluetooth is off</td> 
  </tr> 
  <tr> 
   <td><strong>White (flashing)</strong></td> 
   <td>Pairing mode / connecting</td> 
  </tr> 
  <tr> 
   <td><strong>White (solid)</strong></td> 
   <td>Connected to Bluetooth device</td> 
  </tr> 

</table> &nbsp; 


</html>

----
[[Category:S1]]
[[Category:Battery]]