View source for Behringer Xenyx 1002B to S1 Pro System

{{S1 icon}}
[[File:Behringer XENYX 1002B.png|400px|link=http://media.music-group.com/media/PLM/data/docs/P0A04/1002B_P0A04_M_EN.pdf|right|Behringer XENYX 1002B]]

== Introduction ==
Here's a link to the [http://media.music-group.com/media/PLM/data/docs/P0A04/1002B_P0A04_M_EN.pdf Behringer 1002 B Owners Manual].

The MAIN outputs from this mixer are unbalanced, 1/4 inch (6mm) Tip-Sleeve connections. You can use ordinary instrument cables. They don't have to be balanced.

<html>
<img alt="Image result for 1/4 instrument cable" class="irc_mi" src="https://az58332.vo.msecnd.net/e88dd2e9fff747f090c792316c22131c/Images/Products2629-1200x1200-305800.jpg" style="margin-top: 0px;" width="329" height="353"></p>
</html>
For best results, use cables that are less than 20 feet (6 meters).

== S1 Pro System Settings ==
{{S1 Pro Mixer Settings}}

== Stereo with two S1 Pro Systems==
If you have two S1 Pro systems, connect one to each of the MAIN OUTPUTS (Left and Right)

[[File:Behringer Xenyx 1002B to 2 S1 Pro Stereo.png|600px]]

<html>
<br><br><ol><li>Connect the MAIN OUTPUT Left to the first S1 Pro Channel 1</li><li>Connect the MAIN OUTPUT Right to the second S1 Pro Channel 2</li><li>Set the Behringer <strong>MAIN</strong> output at "0" bring up the volume on each S1 Pro until you see solid green but not red on the channel LED.</li></ol><br><br>
</html>

==Mono with one S1 Pro System (two cables)==
[[File:Behringer Xenyx 1002B to S1 Pro Stereo 2.png|600px]]

<html><ol><li>Connect the MAIN OUTPUT Left to the S1 Pro Channel 1</li><li>Connect the MAIN OUTPUT Right to the S1 Pro Channel 2</li><li>Set the Behringer <strong>MAIN</strong> output at "0" bring up the volume on each S1 Pro channel until you see solid green but not red on the channel LED.</li></ol>
</html>

== Mono with one S1 Pro System (one cable)==
Note: This won't work correctly if you are using the RCA inputs on the Behringer mixer.

[[File:Behringer Xenyx 1002B to S1 Pro 2.png|600px]]


<html>
<p>Notes:</p><p>The Behringer mixer stereo. The S1 Pro System is mono. So we need to get a mono signal out of the Behringer mixer if you're using one S1 Pro.</p><ol><li>Set all the PAN and BAL controls hard LEFT</li><li>Connect the LEFT Main Output to the S1 Pro channel 1 or 2.</li><li>Set the Behringer <strong>MAIN</strong> output at "0" bring up the volume on the S1 Pro until you see solid green but not red on the channel LED.</li>
</html>

----
[[Category:S1 Pro]]
[[Category:Mixer]]
[[Category:Behringer]]