View source for T4S ToneMatch Mixer to S1 Pro system

{{T4S icon}}{{S1 icon}}
<div class="tocdiv">
    <div>__TOC__</div>
    <div><h2>Connect a {{T4S}} to an {{S1}} as the only powered loudspeaker</h2>
;Note: To use the {{T4S}} with an {{S1}} you need a [[ToneMatch Power Supply]] unless you are also connected to an {{Model 1S}} or {{Model II}}.

[[File:ToneMatch Power Supply Connection.png|400px|link=ToneMatch Power Supply]]

<h2>Connect a {{T4S}} to an {{S1}} as a Monitor</h2>
If you are using the {{S1}} as monitor while using an L1 or L1 Pro as the main system, you can connect as shown in the rest of this article OR create a separate monitor mix using the [[T4S Aux Outputs]]. Everything else in this article is still applicable. For more details see: [[T4S Aux Outputs]]
    </div>
</div>  

;Mono

[[File:T4S 14 to S1 Pro.jpg|400px]]

;Stereo

[[File:T4S 14 to S1 Pro x2.jpg|400px]]

If you have questions please [https://www.bosepro.community/g/portable/topic/t4s-to-s1-pro join the conversation in the Bose Portable PA Community]

== Connections ==
# Leave the T4S and S1 Pro turned off until you have things connected
# Connect the T4S power supply to the T4S (T4S power supply sold separately)
#Connect the T4S Right Output to S1 Pro channel 1 or 2

<div class="tocdiv">
    <div>
;Recommended cable
Use a {{1/4 TRS}} cable for best results.

[[File:14trstotrs.jpg|300px]]

</div>
<div>
You can use and {{1/4 TRS}} to XLR cable, but you will have to turn down the volume on the {{S1}} to avoid clipping the input.

[[File:14TRStoXLRMale.jpg|300px]]
            
    </div>
</div>

== T4S Settings ==
# Set the Rotary Selector to PAN/AUX
# Press the CH EDIT button for each channel you are using and pan the input hard RIGHT<br>Note: Steps 1 and 2 above are one-time-only. You don't have to change this unless you get another S1 Pro and want to run in stereo
# Connect all your sound sources to the T4S
#* Turn on those sound sources that have power switches
# Turn off the T4S Master Volume 
# If any of your sound sources require phantom power, press the T4S phantom power button
# Turn on the T4S
# Turn on the S1 Pro
# Bring up the channel volume on the S1 Pro to about 11:00 o'clock
# Control the volume using the T4S Master Volume

If you see the S1 Pro channel 1 light turning solid red occasionally, turn down the volume on the T4S <br>Or if you see the S1 Pro channel 1 light turning solid red frequently, turn down the volume on the S1 Pro

== S1 Pro Settings ==
# Turn off the reverb
# Set both tone controls to the center position
# Set the channel volume off
# Turn on the T4S

{{S1 Pro with External Device

|Device= [[T4S/T8S ToneMatch® Mixer]]
|discussion page = If you have questions, please join the conversation in the [https://www.bosepro.community/g/portable/topic/connecting-t4s-tonematch-mixer-to-bose-s1-pro?reply=35372794827754454#35372794827754454 Bose Portable PA Community].

}} 

----
[[Category:T4S]]
[[Category:S1 Pro]]
[[Category:Connections]]