View source for Template:ToneMatch Mixer to F1 Model 812 XLR Connection

=== ToneMatch Mixer to {{F1}} XLR ===
Connecting the T4S/T8S via Analog Connection
#	Make sure the device you are connecting to and the T4S/T8S are powered off and the T4S/T8S Master volume control is set to minimum.
#	Using XLR balanced cables, connect one or two devices to the XLR Stereo Outputs of your T8S (see Figure 10).
#*Note: The T4S/T8S can be connected to a device via the Analog R Output port using a 1/4" TRS cable (sold separately). Plug the other end of the TRS cable into the Analog Input port of the device. To connect the T4S/T8S to two devices, connect a second device to the Analog L Output port on the T4S/T8S using a 1/4" TRS cable.
#	Connect a ToneMatch* power supply to the Power port of the T4S/T8S and plug it into a live AC outlet. Refer to “Connecting the ToneMatch’ Power Supply” on page 14.
<!--

#	Turn on the T4S/T8S mixer and then turn on the device.
#	Connect your instruments and adjust levels. Refer to “Optimizing Input Gain and Output Volume” on page 17.
-->

[[File:T8S to F1 Model 812.png]]

{{ToneMatch Mixers to F1 Model 812}}

----
[[Category:T8S]]
[[Category:T4S]]
[[Category:F1]]
[[Category:Connections]]