Difference between revisions of "S1 Pro+ Wireless Insert Mode With Modeler"
m |
m |
||
(10 intermediate revisions by the same user not shown) | |||
Line 2: | Line 2: | ||
In this setup, the Bose Wireless transmitters are connected to: | In this setup, the Bose Wireless transmitters are connected to: | ||
− | * XLR to Sennheiser MD 445 handheld microphone (Channel 1) | + | * XLR to [[Sennheiser MD 445|Sennheiser MD 445]]] handheld microphone (Channel 1) |
* 1/4-inch to electric guitar (Channel 2) | * 1/4-inch to electric guitar (Channel 2) | ||
+ | |||
[[File:S1 Pro+ Wireless Insert Mode Modeler 1.jpg|600px]] | [[File:S1 Pro+ Wireless Insert Mode Modeler 1.jpg|600px]] | ||
+ | Close-up of 1/4-inch transmitter connected to the electric guitar | ||
[[File:S1 Pro+ Wireless Insert Mode Modeler 2.jpg|600px]] | [[File:S1 Pro+ Wireless Insert Mode Modeler 2.jpg|600px]] | ||
[[File:S1 Pro+ Wireless Insert Mode Modeler 3.jpg|600px]] | [[File:S1 Pro+ Wireless Insert Mode Modeler 3.jpg|600px]] | ||
+ | |||
+ | Close-up on the microphone with the XLR wireless transmitter. Later, the microphone was set up on a microphone stand. | ||
[[File:S1 Pro+ Wireless Insert Mode Modeler 4.jpg|600px]] | [[File:S1 Pro+ Wireless Insert Mode Modeler 4.jpg|600px]] | ||
+ | |||
+ | Connections to the back of the guitar modeler. | ||
+ | *Red connects to the Tip-Ring-Sleeve TIP connector and goes to the modeler INPUT | ||
+ | *Grey connects to the Tip-Ring-Sleeve RING connector and goes to the model OUTPUT | ||
+ | *Note: Your cable may use different colours. | ||
[[File:S1 Pro+ Wireless Insert Mode Modeler 5.jpg|600px]] | [[File:S1 Pro+ Wireless Insert Mode Modeler 5.jpg|600px]] | ||
+ | |||
+ | The Tip-Ring-Sleeve to two Tip-Sleeve cable (often called an INSERT cable) | ||
[[File:S1 Pro+ Wireless Insert Mode Modeler 6.jpg|600px]] | [[File:S1 Pro+ Wireless Insert Mode Modeler 6.jpg|600px]] | ||
+ | |||
+ | The Tip-Ring-Sleeve end of cable going to S1 Pro+ channel 2. | ||
+ | ;Notes | ||
+ | *When using an amp modeler pedal, for best performance, use the Bose Music app to select the Full Range Flat Response (FRFR) ToneMatch preset for that channel. | ||
+ | * The XLR cable (with the red ring on the connector) is connecting the S1 Pro+ LINE OUT to a front of house system. This could also have been an L1 system. | ||
[[File:S1 Pro+ Wireless Insert Mode Modeler 7.jpg|600px]] | [[File:S1 Pro+ Wireless Insert Mode Modeler 7.jpg|600px]] | ||
− | [[File:S1 Pro+ Wireless Insert Mode | + | Documentation from the [[S1 Pro+ Owners Guide.pdf|S1 Pro+ Owner's Guide]] |
+ | ;Notes: | ||
+ | *Be sure to set the S1 Pro+ channel INSERT to Auto | ||
+ | *In the example above, we connected the guitar to channel 2; in the documentation below, it is connected to channel 1. The principles are equally applicable. | ||
+ | |||
+ | [[File:S1 Pro+ Wireless Insert Mode Manual.jpg|600px]] | ||
+ | |||
+ | <div style="float:right;max-width:50%"> | ||
+ | {{Editorial ST | ||
+ | |Author = [[User:ST|ST]] | ||
+ | |discussion page = to [https://twitter.com/st_muso Twitter @ST_Muso] or [https://www.linkedin.com/in/stpro/ LinkedIn @STPro] | ||
+ | <!-- [https://www.facebook.com/groups/BoseL1/ Bose L1 Facebook Group] <br>or --> | ||
+ | }}</div> | ||
---- | ---- | ||
[[Category:S1 Pro+]] | [[Category:S1 Pro+]] |
Latest revision as of 21:08, 6 July 2024
This is a super convenient feature of the S1 Pro+ when using a Bose Wireless Transmitter.
In this setup, the Bose Wireless transmitters are connected to:
- XLR to Sennheiser MD 445] handheld microphone (Channel 1)
- 1/4-inch to electric guitar (Channel 2)
Close-up of 1/4-inch transmitter connected to the electric guitar
Close-up on the microphone with the XLR wireless transmitter. Later, the microphone was set up on a microphone stand.
Connections to the back of the guitar modeler.
- Red connects to the Tip-Ring-Sleeve TIP connector and goes to the modeler INPUT
- Grey connects to the Tip-Ring-Sleeve RING connector and goes to the model OUTPUT
- Note: Your cable may use different colours.
The Tip-Ring-Sleeve to two Tip-Sleeve cable (often called an INSERT cable)
The Tip-Ring-Sleeve end of cable going to S1 Pro+ channel 2.
- Notes
- When using an amp modeler pedal, for best performance, use the Bose Music app to select the Full Range Flat Response (FRFR) ToneMatch preset for that channel.
- The XLR cable (with the red ring on the connector) is connecting the S1 Pro+ LINE OUT to a front of house system. This could also have been an L1 system.
Documentation from the S1 Pro+ Owner's Guide
- Notes
- Be sure to set the S1 Pro+ channel INSERT to Auto
- In the example above, we connected the guitar to channel 2; in the documentation below, it is connected to channel 1. The principles are equally applicable.
This article expresses my opinion and experience. Please post comments to Twitter @ST_Muso or LinkedIn @STPro. Thank you — ST. |