Difference between revisions of "S1 Pro+ Wireless Insert Mode With Modeler"
m |
m |
||
Line 6: | Line 6: | ||
[[File:S1 Pro+ Wireless Insert Mode Modeler 1.jpg|600px]] | [[File:S1 Pro+ Wireless Insert Mode Modeler 1.jpg|600px]] | ||
− | Close up of 1/4-inch transmitter connected to the electric guitar | + | Close-up of 1/4-inch transmitter connected to the electric guitar |
[[File:S1 Pro+ Wireless Insert Mode Modeler 2.jpg|600px]] | [[File:S1 Pro+ Wireless Insert Mode Modeler 2.jpg|600px]] | ||
[[File:S1 Pro+ Wireless Insert Mode Modeler 3.jpg|600px]] | [[File:S1 Pro+ Wireless Insert Mode Modeler 3.jpg|600px]] | ||
+ | Close-up on the microphone with the XLR wireless transmitter. Later, the microphone was set up on a microphone stand. | ||
[[File:S1 Pro+ Wireless Insert Mode Modeler 4.jpg|600px]] | [[File:S1 Pro+ Wireless Insert Mode Modeler 4.jpg|600px]] | ||
+ | |||
+ | Connections to the back of the guitar modeler. | ||
+ | *Red connects to the Tip-Ring-Sleeve RING connector and goes to the modeler INPUT | ||
+ | *Grey connects to the Tip-Ring-Sleeve Tip connector and goes to the model OUTPUT | ||
[[File:S1 Pro+ Wireless Insert Mode Modeler 5.jpg|600px]] | [[File:S1 Pro+ Wireless Insert Mode Modeler 5.jpg|600px]] | ||
+ | The Tip-Ring-Sleeve to two Tip-Sleeve cable (often called an INSERT cable) | ||
[[File:S1 Pro+ Wireless Insert Mode Modeler 6.jpg|600px]] | [[File:S1 Pro+ Wireless Insert Mode Modeler 6.jpg|600px]] | ||
+ | |||
+ | The Tip-Ring-Sleeve end of cable going to S1 Pro+ channel 2. | ||
+ | :When using an amp modeler pedal, for best performance, use the Bose Music app to select the Full Range Flat Response (FRFR) ToneMatch preset for that channel. | ||
[[File:S1 Pro+ Wireless Insert Mode Modeler 7.jpg|600px]] | [[File:S1 Pro+ Wireless Insert Mode Modeler 7.jpg|600px]] |
Revision as of 14:00, 2 July 2024
This is a super convenient feature of the S1 Pro+ when using a Bose Wireless Transmitter.
In this setup, the Bose Wireless transmitters are connected to:
- XLR to Sennheiser MD 445 handheld microphone (Channel 1)
- 1/4-inch to electric guitar (Channel 2)
Close-up of 1/4-inch transmitter connected to the electric guitar
Close-up on the microphone with the XLR wireless transmitter. Later, the microphone was set up on a microphone stand.
Connections to the back of the guitar modeler.
- Red connects to the Tip-Ring-Sleeve RING connector and goes to the modeler INPUT
- Grey connects to the Tip-Ring-Sleeve Tip connector and goes to the model OUTPUT
The Tip-Ring-Sleeve to two Tip-Sleeve cable (often called an INSERT cable)
The Tip-Ring-Sleeve end of cable going to S1 Pro+ channel 2.
- When using an amp modeler pedal, for best performance, use the Bose Music app to select the Full Range Flat Response (FRFR) ToneMatch preset for that channel.