Difference between revisions of "Template:Why Use a -20 dB Pad"
m (Template:Why -20 dB Pad moved to Template:Why Use a -20 dB Pad) |
m |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | Why use a -20 dBu Pad | + | Why use a -20 dBu Pad? |
| − | :The XLR connects to a balanced low impedance input stage with a lot of gain. The 1/4" input is unbalanced, has about 20 dB less overall gain but a very high input impedance. <ref> [http://bose.infopop.cc/eve/forums/a/tpc/f/867107664/m/8491032313?r=4771073313#4771073313 Hilmar-at-Bose talks about Channels 1 and 2]</ref><noinclude><references /><noinclude> | + | :The XLR connects to a balanced low impedance input stage with a lot of gain. The 1/4" input is unbalanced, has about 20 dB less overall gain but a very high input impedance. <ref> [http://bose.infopop.cc/eve/forums/a/tpc/f/867107664/m/8491032313?r=4771073313#4771073313 Hilmar-at-Bose talks about Channels 1 and 2]</ref><noinclude><references /> |
| + | [[Category:Pad]]</noinclude> | ||
Latest revision as of 10:50, 26 May 2011
Why use a -20 dBu Pad?
- The XLR connects to a balanced low impedance input stage with a lot of gain. The 1/4" input is unbalanced, has about 20 dB less overall gain but a very high input impedance. [1]