Difference between revisions of "Securing the T1® to the Microphone Stand Bracket"
m |
m |
||
Line 18: | Line 18: | ||
<html><img src="http://bose.infopop.cc/eve/forums/a/ga/ul/6190039046/inlineimg/Y/T1-1.jpg" width="640" alt="source: http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/1640046046?r=5190039046#5190039046"></html> | <html><img src="http://bose.infopop.cc/eve/forums/a/ga/ul/6190039046/inlineimg/Y/T1-1.jpg" width="640" alt="source: http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/1640046046?r=5190039046#5190039046"></html> | ||
− | + | ||
+ | — [http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/1640046046?r=5190039046#5190039046 source] | ||
+ | |||
+ | |||
+ | ---- | ||
[[Category:T1]] | [[Category:T1]] |
Revision as of 13:06, 18 February 2013
This is how I secure the T1® to the T1® Microphone Stand Bracket
- There is a velcro strap on the black ToneMatch cable.
- I use the velcro to secure the ToneMatch cable to the microphone stand just above the Microphone Stand Adapter (the thing that clamps around the mic stand).
- Then I insert the ToneMatch cable into the T1®. It locks into place.
- At this point, most people would put the T1® on the bracket and attach the other cables.
- I insert all the other cables into the T1® before I put it on the bracket. I do it this way because I have all my cables strapped to the microphone stand (I don't take them off between gigs). So there's no hanging stress from those either.
- Finally, I set the T1® on top of the bracket.
— source
— source