Difference between revisions of "Effect / Alesis / NanoVerb"
m |
|||
| Line 10: | Line 10: | ||
http://bose.infopop.cc/eve/forums/a/ga/ul/1411053732/inlineimg/Y/effectsSerial%5B1%5D.gif | http://bose.infopop.cc/eve/forums/a/ga/ul/1411053732/inlineimg/Y/effectsSerial%5B1%5D.gif | ||
| + | |||
| + | How the Insert Cable is wired | ||
| + | |||
| + | http://bose.infopop.cc/eve/forums/a/ga/ul/8961067252/inlineimg/Y/tipRingSleevePS1.gif | ||
Revision as of 01:53, 22 August 2006
Alesis Nanoverb
Serial Effects - Excerpt from the PS1 Powerstand Manual
How the Insert Cable is wired
Links
Excerpt from the Alesis NanoVerb Manual
Blue "Ring" is Send from the Bose System
Purple "Tip" is the Return to the Bose System
From Page 15 in the Alesis NanoVerb Manual
It seems that with the Nanoverb you can use two channels when you operate in "stereo" mode. But you cannot control the left and right channels independently. So you can maintain the separation between the channels but not have them running different levels, mix, or effects.
EDIT: Note - you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up to 2 max).
There is more discussion in the Original post in the Bose® Musicians Community Message Boards</ref>